Tommy c Posted October 2, 2017 Report Share Posted October 2, 2017 Stunning job there. 1 Link to comment Share on other sites More sharing options...
wearecity Posted October 2, 2017 Report Share Posted October 2, 2017 Looks great, shame the layout to show it off, isn't a super hi-res razor sharp DX. 1 Link to comment Share on other sites More sharing options...
Reg Posted October 2, 2017 Author Report Share Posted October 2, 2017 Just now, wearecity said: Looks great, shame the layout to show it off, isn't a super hi-res razor sharp DX. There are still a lot of good classics in the world... 1 Link to comment Share on other sites More sharing options...
Reg Posted December 24, 2017 Author Report Share Posted December 24, 2017 On 02/10/2017 at 7:10 PM, wearecity said: Looks great, shame the layout to show it off, isn't a super hi-res razor sharp DX. Is this better... 1 1 Link to comment Share on other sites More sharing options...
Reg Posted January 1, 2018 Author Report Share Posted January 1, 2018 Two more... 1 1 Link to comment Share on other sites More sharing options...
evo1 Posted January 2, 2018 Report Share Posted January 2, 2018 Sound videos these, And that cabinet is just the right shape. Been looking at a couple on ebay but to far for me to collect starting at a £5er possible one of them would of been ok without making to much changes. will have to wait till something comes up a bit near to me. Anyways would you do anything different to your cab?? And am i right in saying you have to assign the buttons to each machine you put on there? And lets say you've put 500 machines on there all with assigned buttons can you back them up so if your hard drive goes tits up you haven't got to do it all again? Sorry if you all ready covered these questions but fme is a mine field. O and who is the lady in the back ground on the pic you've pixaled?? Link to comment Share on other sites More sharing options...
Reg Posted January 2, 2018 Author Report Share Posted January 2, 2018 So let's talk about the most important thing first - the pixal lady... ...I blurred her out as I had some insane thought that there would be some stupid YouTube T&C I would be breaking by allowing minors to view nudity. Stupid I know - but better safe then sorry. Who she is... I've just done a quick lookup... https://www.page3.com/article/wednesday-march-8-rhian-from-manchester/ The JPM Vogue cabinet is probably one of the better ones to use as it has a lot of depth. All buttons are hardcoded on layouts. To put a layout in the machine takes about 10 minutes work ( including testing ) as long as I don't mess with the background of it. Everything can be backed up to external hard drive for safe keeping. If I was to do it again, I would change nothing really. This operations 100% keyboard and mouse free when working just as the cabinet - it's perfect for my needs. The only thing I'd probably do differently ( assuming I was to have two of these side by side is reverse the colour scheme so the newer one would be a mirror of this one. Link to comment Share on other sites More sharing options...
AK45 Posted January 7, 2018 Report Share Posted January 7, 2018 Just superb an what every man cave should have and i got to say i am green with envy and wish i had the talent for this 1 For Fruit Machine Preview Video's https://www.youtube.com/@akfortyfive4574/videos These video's created by me are solely to showcase the talent of the creators and all who helped in bringing these machines to life,they are in no way a guide on how to play the machine or show how to exploit it Link to comment Share on other sites More sharing options...
Reg Posted January 9, 2018 Author Report Share Posted January 9, 2018 To be honest - I have very little talent and certinally no woodman skills. I think with time - anybody could do this. Link to comment Share on other sites More sharing options...
Reg Posted January 16, 2018 Author Report Share Posted January 16, 2018 Now this is what I would like to add... Link to comment Share on other sites More sharing options...
Reg Posted February 3, 2018 Author Report Share Posted February 3, 2018 Had a couple of hours to spare this evening so topper got changed... Had to replace all the internal leds with those cheap strips with a remote from Amazon, think it worked out well. https://www.amazon.co.uk/gp/product/B072F3GGGJ I also have at least one £500 machine on the cabinet, so it's ok to put this there. Link to comment Share on other sites More sharing options...
J777 Posted April 4, 2018 Report Share Posted April 4, 2018 What a great job you have done there Reg. Well done. 1 Link to comment Share on other sites More sharing options...
Reg Posted April 5, 2018 Author Report Share Posted April 5, 2018 Thank you - a lot of work went into this - but if there is one lesson learnt from doing the whole thing, get a JPM vogue cabinet and use it as a shell. I do not have the skills of others who build their own cabinets from nothing and at least if you do that way - IE - pre-purchased cabinet, some of the work is less of a nightmare. The biggest miracle as I am not a woodman, is this went down and completed with zero hospital visits or the need to anywhere near any medical facilities. Link to comment Share on other sites More sharing options...
MPU_FIVE Posted April 5, 2018 Report Share Posted April 5, 2018 I want one like that.... one day hopefully i will make one, when i have scraped together all the cash needed to buy all the bits. 1 Link to comment Share on other sites More sharing options...
wayfinder Posted April 5, 2018 Report Share Posted April 5, 2018 this is awesome, want one! 1 Link to comment Share on other sites More sharing options...
Reg Posted April 22, 2018 Author Report Share Posted April 22, 2018 On 05/04/2018 at 18:03, MPU_FIVE said: I want one like that.... one day hopefully i will make one, when i have scraped together all the cash needed to buy all the bits. eBay is your absolute friend on this. 1 Link to comment Share on other sites More sharing options...
niallquinn Posted April 22, 2018 Report Share Posted April 22, 2018 I love that coin acceptor, and hopper mech! ...and presumably the lass with her tits out in the pixelated calendar?? NQ. 1 Link to comment Share on other sites More sharing options...
Retrofruit Posted June 13, 2018 Report Share Posted June 13, 2018 An incredible project, well done. I was wondering, as part of your original thought process did you give any consideration to mounting two screens in the cabinet, one for lower glass and one for upper. Do you think that is technically possible or are the available screen sizes now unsuitable? 1 Link to comment Share on other sites More sharing options...
Reg Posted June 13, 2018 Author Report Share Posted June 13, 2018 1 hour ago, Retrofruit said: An incredible project, well done. I was wondering, as part of your original thought process did you give any consideration to mounting two screens in the cabinet, one for lower glass and one for upper. Do you think that is technically possible or are the available screen sizes now unsuitable? Thank you ! So TBH, this would not have been possible without advice from @Wizard and what he made MFME do as well. It was always going to be a single portrait screen - however originally I was going to go for a touch screen - that got abandoned and I went for a curve screen instead. I do believe it would be possible with touch screens - however, you're going to do an awful lot of editing of the layouts. This was made to be done as easy as possible. I'll do a video at some point of the conversion from a layout that I download to putting it in he cabinet. 1 Link to comment Share on other sites More sharing options...
serene02 Posted June 14, 2018 Report Share Posted June 14, 2018 I was building a cab with 2 x 10" touchscreens, mfme didn't support multi screen at this time and ended up scrapping the project. Not sure if mfme supports multi screen in the later releases. J Link to comment Share on other sites More sharing options...
Reg Posted June 15, 2018 Author Report Share Posted June 15, 2018 22 hours ago, A:E said: I was building a cab with 2 x 10" touchscreens, mfme didn't support multi screen at this time and ended up scrapping the project. Not sure if mfme supports multi screen in the later releases. J Perhaps let windows control the positioning of the screens and extend it to both ? Here is another video of the cabinet playing games. This one is from @Tommy c while the video came out a little dark, it's still awesome to play this in the cabinet. Thank you @Tommy c. @vectra666 also has a very good outing on display here which is not on this thread... ...and @Benjamoose has this one. 1 Link to comment Share on other sites More sharing options...
Reg Posted June 15, 2018 Author Report Share Posted June 15, 2018 ...and the final one of the evening, a fantastic game from @Pook with a mouse pointer in view that should not have been there ! 2 Link to comment Share on other sites More sharing options...
fatdad Posted October 12, 2018 Report Share Posted October 12, 2018 the only thing missing is a few cigarette burns on the buttons 1 1 Link to comment Share on other sites More sharing options...
1969kappa Posted October 12, 2018 Report Share Posted October 12, 2018 Looking good is that a games arcade machine in the back ground? 1 Link to comment Share on other sites More sharing options...
Reg Posted October 12, 2018 Author Report Share Posted October 12, 2018 1 hour ago, 1969kappa said: Looking good is that a games arcade machine in the back ground? Yep long since gone tho - I have it away. It was made by Hanaho using real materials for these cabinets - the insides had failed years ago ( was real arcade monitor ) and all USA lighting and cabling - it had been completely replaced with UK stuff. I simply was not using it so gave it to a mate that had a few kids who would make the most of it. Link to comment Share on other sites More sharing options...
Recommended Posts