-
Posts
1,795 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Downloads
Articles
Everything posted by davep180
-
-
-
-
-
-
-
-
-
Finally I am doing a cabinet! (Interplay donor)
davep180 replied to Martinb's topic in Cabinet Building
Not sure mate. Use Triac ->Hopper (1 or 2) Then put the Triac number from the diag in the box and add a multiplier, even if it’s just 1. -
Finally I am doing a cabinet! (Interplay donor)
davep180 replied to Martinb's topic in Cabinet Building
This is my config for Hot Pot. -
Finally I am doing a cabinet! (Interplay donor)
davep180 replied to Martinb's topic in Cabinet Building
Here’s my config screen for Line Up. My 10p hopper is hopper 2. Hopper 1 is £1’s. On the diag screen 10p is Triac 1 and the token is triac 2. Value 1 is the triac number and value 2 is the multiplier (you can do 20p as 2x10p or 50p as 5x10p) -
Deal or No Deal - Live the Dream £5/£70/£100 Dx's
davep180 commented on vectra666's file in Bell-Fruit
-
Concept (Scorpion 2) Super MultiNudge - 20p / £5, 25p / £8 and 30p / £10 4K HDX
davep180 commented on slotsmagic's file in Concept
-
Noob Questions and is there a General Build Guild?
davep180 replied to Robotgreg's topic in Cabinet Building
Scroll through the section you posted in! There are several build threads, lots of information about pac drives and ipacs, hoppers and mechs. Just read through a few, wibble wobble's guide is a good place to start. Your questions will have been asked somewhere in this section. -
-
Finally I am doing a cabinet! (Interplay donor)
davep180 replied to Martinb's topic in Cabinet Building
Those mk4 hoppers are rapid too! Nice one @Martinb. I must say that it was @WibbleWobble(hi mate, hope all is well) who first got that hopper going for me, I just did a write up for it. Glad it’s helped someone out though. -
-
-
Finally I am doing a cabinet! (Interplay donor)
davep180 replied to Martinb's topic in Cabinet Building
Sadly you can’t just swap them around on scorp 4 because the pac drive is looking for a certain keystroke on each hopper. @Amusements had a method which sorted his, but technically, was above my head lol. You will probably be alright, as I’ve seen your work with real machines on the Mecca. Me, not so much. As for line up, it was pre £1 coins so I think you are stuck with 50p max. I just play with tens on those old school ones. If anyone does know a workaround, I would like to hear it. I think I tried having 2 50p inputs, but I don’t think it read both? It’s been a while since I messed with this stuff.