Ginge

Thanks for reminding me I hadn’t donated yet myself for 2026. Just donated £25 it’s that easy.

I have donated many times and never had any issues so I’d say it’s safe. Also not heard of anyone else having issues I’m sure they would have posted something if they had. Welcome to the site

Not quite the same machines but just seen this that Electrocoin are promoting at the eag in London new version of bar x 7s using scorpion 6 tech.

Love a bit of Still game great program. haunted house was another one I remember.

Far as I know the only way to program these is with an if17 programmer kit which can be purchased from innovative technology think they are around £40 but it doesn’t come with 12v psu. But you also need to download the Itl management software to program.

@VenumX not sure why that is happening, I have never used one with the £50 note. Which I would assume is the same as a €50. What happens if you just leave pin 8 not connected to anything.

No problem if you need any more information let me know I might be able to help.

Can confirm nv10usb+ also uses same wiring, this is what I have used as it’s smaller.

@VenumX It does have the pin wiring on the side. pin1 = vend 1/£5 to iPac pin2 = vend2/£10 to iPac pin3 = vend3/£20 to iPac pin4 = vend4/£50 if set up on the acceptor. pin5 = inhibit line for vend1/£5 to 0v pin6 = inhibit line for vend2/£10 to 0v pin7 = inhibit line for vend3/£20 to 0v pin8 = inhibit line for vend4/£50 pin15 = +12v pin16 = 0v/ground pins 5/6/7/8 need to go to 0v/ground to accept notes, eg if pin 5 isn’t attached to 0v it won’t accept £5. Also note acceptor needs to be set up as a parallel unit. hope this helps sorry not very good with schematic.

Don’t know had the bits lying around from scrap. Probably just the price of a nv9+usb and cable I've got a nv10usb lying around that can’t be updated to King Charles might try wiring one of them next as they are smaller and probably cheaper to buy.

Yes I suppose so.

All wired up and working . only thing is I don’t have anymore spare inputs on my I pac2 so have had to add the £5 and 10p together,£10 and 20p together and £20 and 50p together, should be ok as long as i don’t add them 3 coin inputs to any machines that have notes and vice versa. Think in the future I might buy a ipac4 which has 56 inputs and this will future proof if I decide to add hoppers.

This may sound like a stupid question but how do you upload videos from iPhone to this topic would like to post a video once completed if it working.

Ok have started on the wiring, decided to use a 15way ribbon cable rather that individual wires, just thought it would be easier and tidier, have used a 15way dsub socket and plug on one end so I can just unplug the units if I don’t want to use them. Have also used a ribbon cable for note acceptor which uses a 16 pin idc plug again for ease of use rather than individual wires but then joined it to the 15 pin via choc block at this moment but will change to some sort of 5 way plug/socket just so the note acceptor can be unplugged separately.