Jump to content

davep180

  • Posts

    1,783
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by davep180

  1. Thanks Tommy. Very nice.
  2. Brilliant stuff. Thanks Vecs!
  3. Thanks for these. There sure are a lot of options! Bet they look great in your new cab!
  4. davep180

    Master Spy (PCP)

    Great work. Thank you
  5. Not sure mate. Use Triac ->Hopper (1 or 2) Then put the Triac number from the diag in the box and add a multiplier, even if it’s just 1.
  6. Here’s my config screen for Line Up. My 10p hopper is hopper 2. Hopper 1 is £1’s. On the diag screen 10p is Triac 1 and the token is triac 2. Value 1 is the triac number and value 2 is the multiplier (you can do 20p as 2x10p or 50p as 5x10p)
  7. Thank you for these layouts, it's great to have a choice of price of play and jackpots.
  8. Scroll through the section you posted in! There are several build threads, lots of information about pac drives and ipacs, hoppers and mechs. Just read through a few, wibble wobble's guide is a good place to start. Your questions will have been asked somewhere in this section.
  9. davep180

    Loot Shoot by JPM.

    Love this era of machines. Thanks for this @Ze Frog
  10. Those mk4 hoppers are rapid too! Nice one @Martinb. I must say that it was @WibbleWobble(hi mate, hope all is well) who first got that hopper going for me, I just did a write up for it. Glad it’s helped someone out though.
  11. davep180

    Sinbad £6T/£10

    Nice ones Woodsy. Thanks.
  12. Thanks @SocialDragon368 and all concerned with this one.
  13. Sadly you can’t just swap them around on scorp 4 because the pac drive is looking for a certain keystroke on each hopper. @Amusements had a method which sorted his, but technically, was above my head lol. You will probably be alright, as I’ve seen your work with real machines on the Mecca. Me, not so much. As for line up, it was pre £1 coins so I think you are stuck with 50p max. I just play with tens on those old school ones. If anyone does know a workaround, I would like to hear it. I think I tried having 2 50p inputs, but I don’t think it read both? It’s been a while since I messed with this stuff.
  14. 10p and £1 is what I use too. To help with which machine pays what, have the diag box open in the background with misc ticked. It’ll then show you which triacs are firing, if possible watch the machine as it pays, you can often see if it’s paying in 10’s 20’s 50’s or £1’s from the way it counts down the cash amount. Then switch to diagnose to see what it says. Most mpu5 will just fire from hopper 1. Watch out for some scorp 4 machines, as they often just dump the contents of your hopper, as 1 and 2 are the wrong way round to mpu5, so it never gets the signal to stop!
  15. Thanks for this. Great effort from all involved.
  16. davep180

    Fast Trak by JPM.

    Thnks Ze Frog and all involved in this one
  17. There are some lurking about on this site somewhere. Some from QuidVicious or similar (they’ve got union jacks on them) and I think someone shared their own ones too. I just don’t know where they are, sorry.
×
×
  • Create New...