pilsburydoughman Posted December 7, 2020 Report Share Posted December 7, 2020 How can I alter the size of the slaves ? They are tiny for some reason? Link to comment Share on other sites More sharing options...
Tommy c Posted December 7, 2020 Report Share Posted December 7, 2020 Try double clicking on one of the slaves see what happens! Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 7, 2020 Author Report Share Posted December 7, 2020 That was the very first thing I tried.....it didnt do anything? Link to comment Share on other sites More sharing options...
vectra666 Posted December 7, 2020 Report Share Posted December 7, 2020 Try unlinking them then undo the border size by bringing the top bar up I had this with pink panther infact two disappeared off screen completely Link to comment Share on other sites More sharing options...
slasher Posted December 7, 2020 Report Share Posted December 7, 2020 Have you tried a magnifying glass? 1 Link to comment Share on other sites More sharing options...
wearecity Posted December 8, 2020 Report Share Posted December 8, 2020 (edited) 1/ Click on the first slave, that means it's invisibly selected. 2/ Press Esc on your keyboard, to bring up the menu. 3/ Click on Design, then edit mode. 4/ Drag the bottom right of the slaves window, to the size you want it to be. 5/ Drag the slave to the position under the top box where you want it be in. 6/ Press F1, gets rid of the menu (if it's not correctly positioned for you, press esc again to bring up the menu and have another go at positioning it) 7/ Repeat the steps above for the other 2 slaves. 8/ Press F7 to quick save. 9/ Press Ctrl Q to quit the layout. 10/ Reload layout, all should be as you left it. Some other little bits. 1/ You can move the whole layout around the screen, by holding the left shift key on your keyboard and dragging it around with the mouse. 2/ If you click on the top box and choose ALT U, it will unlink the slaves. You can then move the slaves around individually by left shift key and left mouse button. This might be easier to position them. 3/ Once everything is where it is perfect for you, then click on top box and ALT L, to link the slaves. Edited December 8, 2020 by wearecity 2 1 Link to comment Share on other sites More sharing options...
woodsy Posted July 6, 2021 Report Share Posted July 6, 2021 I can’t get the slaves to Load with the top box, only one of the other, do I need to put the slaves in the same folder as the top box? Truly just can’t figure it out on my own soz 1 living the dream Link to comment Share on other sites More sharing options...
dad Posted July 6, 2021 Report Share Posted July 6, 2021 When you first downloaded the layout, everything should have been in place and no alterations should have been necessary. You could maybe try downloading it again and overwriting your existing files. Link to comment Share on other sites More sharing options...
wearecity Posted July 6, 2021 Report Share Posted July 6, 2021 1 hour ago, woodsybaby said: I can’t get the slaves to Load with the top box, only one of the other, do I need to put the slaves in the same folder as the top box? Truly just can’t figure it out on my own soz EDIT......Do as Dad says first, if it doesn't work, then do the below. 1/ Open the emulator and load the top box. 2/ Then open the emulator again (just click on the mfme file again and it will load another instance of the emulator) and load a slave. 3/ Repeat step 2 twice more to open up the other 2 slaves. So you have the top box and the 3 slaves loaded. 4/ Left click on the top box and hold down the ALT key on your keyboard and while holding it down, press L on the keyboard. 5/ You will see a message saying 3 games linked on the top box and game linked on the slaves. 6/ Press CTRL Q on the keyboard to close everything down. 7/ Open up the top box and the 3 slaves should load, as well. Once you have the top box and 3 slaves open, then follow the instructions in my previous post about resizing and moving everything in place. 1 Link to comment Share on other sites More sharing options...
woodsy Posted July 6, 2021 Report Share Posted July 6, 2021 42 minutes ago, wearecity said: EDIT......Do as Dad says first, if it doesn't work, then do the below. 1/ Open the emulator and load the top box. 2/ Then open the emulator again (just click on the mfme file again and it will load another instance of the emulator) and load a slave. 3/ Repeat step 2 twice more to open up the other 2 slaves. So you have the top box and the 3 slaves loaded. 4/ Left click on the top box and hold down the ALT key on your keyboard and while holding it down, press L on the keyboard. 5/ You will see a message saying 3 games linked on the top box and game linked on the slaves. 6/ Press CTRL Q on the keyboard to close everything down. 7/ Open up the top box and the 3 slaves should load, as well. Once you have the top box and 3 slaves open, then follow the instructions in my previous post about resizing and moving everything in place. thanks so much for this, it's exactly what my brain accepts as code for me to follow.. really helpful thanks. 1 living the dream Link to comment Share on other sites More sharing options...
Zippy Posted July 6, 2021 Report Share Posted July 6, 2021 (edited) 2 hours ago, woodsybaby said: I can’t get the slaves to Load with the top box, only one of the other, do I need to put the slaves in the same folder as the top box? Truly just can’t figure it out on my own soz I wouldn't worry about it, I know how to load them but still have trouble which is why I also have the single player one too. Good you got there in the end though. Zippy Edited July 6, 2021 by Big J 1 Link to comment Share on other sites More sharing options...
Recommended Posts