davep180
-
Posts
1,796 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Downloads
Articles
Posts posted by davep180
-
-
Nice one. It makes playing the machines that bit better doesn’t it?
-
I’m still a fan of the original! Could you use gifs of machines, ones like @woodsyused to do on his releases?
-
3
-
-
This may help
-
I think you need to ground the 24v to the other grounds. You need a common ground throughout. This has cropped up in a few build threads, so have a look through a few.
-
21 hours ago, EdwardFarmer said:
Thank you for getting back to me, what I pac are you using ?
I-pac 2 mate with pac drive (special) which means lights stay off on startup and only works when prompted.
-
1
-
-
-
Once your mech is wired up correctly to your ipac, there will be lots of wires going into different ports of your ipac. Each coin will register differently. It's the same as registering buttons. You assign a number to each coin, on most layouts a £1 is 0, I personally use 9 for 50p , 8 for 20p, 7 for 10p, 6 for 5p, but you can call them what you like as long as mfme matches your ipac. To test your mech, open up notepad and throw a couple of each coin through it, see what numbers pop up for each coin, then adjust the ipac settings to match the coin number. Pretty sure this explained better than i can do it in 123's cabinet build thread in cabinet building. Good luck!
-
This is information taken from 123's thread in cabinet building.
So you have the following connections :
Pins 1,2 & 3 = 24v +
Pins 4,5 & 6 = Ground
Pin 7 = Start Hopper - Goes to PAC Drive
Pin 8 = not used
Pin 9 = Coin detect - goes to I-PAC
Pin 10 - Not used
I have never used a relay with Azkoyens before.
-
It’s a great community here. We will help you where we can and look forward to any input you can give on those cctalk converters.
-
I've seen this on ebay in the uk. I wasn't 100% sure about it, but looking at the website link you provided, I cannot see why it would not work. If you get one, do a thread on how it works! Parallel hoppers in the uk are quite scarce, so more options are always welcomed. If you are in europe, it will probably be cheaper to buy a parallel hopper on ebay, there are normally lots in Germany, but due to Brexit they just can't post to us anymore without lots of paperwork and high costs.
-
Hoppers and coin acceptor need to be the parallel type. I don’t think the cctalk ones will work in mfme.
-
5 minutes ago, clarkster said:
Next job is the coin mech wish me luck
Good luck. Follow @No1Stoneydiagram found on several threads and its dead easy. I found hoppers to be way more annoying lol
-
1
-
-
If you click on the Diag box then misc before payout, it'll tell you which triacs are being used. The newer machines will be hopper 1 and hopper 2.
-
1
-
-
So simple! I never thought to look in output type! Thanks @foiltravisand thank you Wizard!
-
1
-
-
Thanks @Reg for another nostalgia trip! Me and a mate would try to elbow our way through the whole game. It seemed to be the move that missed the least.
-
1
-
-
20 hours ago, woodsy said:
as davep has mentioned legacy holds a database so full of fruits that brexit can't even empty them
I think it was @MikeyMonsterwho said that mate. Is the medication quite strong, or am I in your head again?
-
2
-
-
Great work. Looks good. I have the same problem with my quit button, I can’t light it up either, but didn’t really look that hard for a solution! If you get a reply, it’ll help me too.
-
1
-
1
-
-
Thought I'd follow up the photos of the cab with a video. MFME starts at 1m27s for those who can't wait. A fair bit is mute, probably not enough! Hope you like it.
-
3
-
3
-
-
I’ve spent a lot of time playing Don’t Pull on my mame cab in the past, definitely my favourite of the 3 games. Thanks for the reminder @Reg
-
1
-
-
Hi @appstraderCan you make the config screen dragable please? I can't get to shut the window down as it's off screen, so haven't been able to look at the new features yet!
-
Had to put the cab away to make room for family, but look forward to seeing the new version soon. Thanks @appstrader! Merry Xmas.
-
Go for it mate. They can be a pain in the arse sometimes when setting it up, but it’ll be worth it.
-
36 minutes ago, tmatt44 said:
Is the a setup for older xp games for win 10?
Is this a request for quiz games? If so, there is a touchscreen section on this site, a lot of which still work on windows 10. Or, try Facebook.
-
1
-
-
20 hours ago, BrandonLDH said:
So i'm a complete newbie to this website and apparently i need to make 2 posts to download MFME?
You need 4 reputation points which you now have, so you should be good to go.
If you still can't download then contact admin mate.
Skool Daze / Spectrum
in 8-bit
Posted
One of the best spectrum releases ever! You could even change the teachers names to ones at your school, and I was of the school age people to do just so!