Jump to content

Cash Attack 2 - Barcrest


Robsonmeg46
 Share

Recommended Posts

  • 4 weeks later...
On 09/02/2023 at 16:16, logopolis said:

Design - Edit Mode. Right click on a reel. Properties. Click reverse or untick if it's already ticked. See if the reels are correct now. If not then you will have to change the numbers in the band. It might take a little while to find the right position.

unable to tick reverse 

really would like to understand this game its not just the numbers on the reels the high and low is wrong to and so is nudges.

Cash Attack 2 - Barcrest.zip

Link to comment
Share on other sites

1 hour ago, Robsonmeg46 said:
  On 09/02/2023 at 16:16, logopolis said:

Design - Edit Mode. Right click on a reel. Properties. Click reverse or untick if it's already ticked. See if the reels are correct now. If not then you will have to change the numbers in the band. It might take a little while to find the right position.

 

1 hour ago, Robsonmeg46 said:

unable to tick reverse 

really would like to understand this game its not just the numbers on the reels the high and low is wrong to and so is nudges.

Here is the layout back all I have done is what @logopolis said previously. Do you know how to go into edit mode etc ? if not go CTRl+E red banner will show at top, put the mouse pointer over a reel/right click mouse then go to properties and it will come up with the screen in the picture and then just tick the box that says reverse. and then apply bottom right of picture,close the window down and then do the same on the next reel and so on.

2023-03-08.png

Cash Attack 2 - Barcrest.zip

  • Like 3
Link to comment
Share on other sites

Just gave it a quick go and yes it's a case of "reversing the reels" all 3 play reels plus the number reel....

Like Logopolis said,in mfme v20.1 go to design mode, click edit (top bar goes red) then right click on each reel and select properties...  in the properties box click the top right "reversed" box...  click apply apply box (bottom right)... once all have been changed (band 1,2,3 And 4 need to be changed) exit out of dialogue box and then click back on design tab and untick edit to return to normal mode.... enjoy game

 

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...