-
Posts
912 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Articles
Everything posted by Road Hog Mad
-
@Reg I wonder... Remember them old bar top slots you could play? If I recall they had a lot in Spanish Bars years ago (25/30 years ago), that type of cabinet I reckon I could cram all this in to.
-
Sorted some coin routing out today, next step will be hoppers. Anyone know of any cheap ones that work?
-
Wired up the coin mech today what a cerfuffle that was, nearly threw it in to a chemical fire. Painted that last bit where the coins go. Beer and pizza time!
-
Trying out an old favourite
-
Yep.. what @No1Stoneysaid
-
That's it for now
-
It also helps having a tool box that I save every screw I find in lol
-
Measure 4 times, cut once!
-
If you don't try! and all that.
-
Installed coin mech today, literally a fag papers thickness for gaps lol, so either extreme good luck or I'm an expert measurer. I had no coin mech holder so had to make my own, the coin mech is held in via 2 screws going through the side of the cab. Easily removable. I had to do a bit of hacking but have some black type of filler from the Taliban Shop (probably plastic explosive lol), but when it's glossed you won't notice A BIG thank you to BF74 (Ron) from the Mecca for re-programming the mech and giving me the black coin entry facer. Highly recommended this guy! *As there is a little gap at the bottom of the coin mech facer I may add a little sticker showing £1, 50p, 20p & 10p (this machine accepts.....) @Reg @woodsy @cja272 May do a cat video in a few days for you all
-
LOL, wife said everyone will think its a cat video, well it's not, it's been put down.
-
@RegThis is the correct section or have I drank too much again?
-
I'm currently on the sick with a wonky shoulder, so its keeping me sane so to speak, having something to do.
-
Fanks! I'll do a more in depth video when its done, I don't like the sound of my own voice though. I have also re-released the software that's running on it for other member future builds, easy to setup and run!
-
AS per the attached document. Released a while back but has had a few bug updates, use it how you wish, modify it etc. not bothered. Touch Launch.rar X.rar
-
So had a spare button so why not use it lol
-
A quick tour, still awaiting coin mech and hoppers....
-
Bit of a ball ache going through these machines altering the coins in and x2 10p's for pay-outs lol, done 70 up to now.
-
Bit of gloss later and... awaiting mech return after reprogramming.
-
Your suggestions, ideas, thoughts etc.
Road Hog Mad replied to Road Hog Mad's topic in Cabinet Building
I think red might be 5V as the additional fan wires are red. -
Your suggestions, ideas, thoughts etc.
Road Hog Mad replied to Road Hog Mad's topic in Cabinet Building
If I recall, them yellow wires with black on them went to the PSU or something on the motherboard. Dunno lol -
Yes I believe it was you lol, I was looking for an alternative to those £63 hoppers. Dunno if they'll work with a 12V PSU I have.
-
Your suggestions, ideas, thoughts etc.
Road Hog Mad replied to Road Hog Mad's topic in Cabinet Building
Hmm, why does that yellow wire have black on it? @serene02 -
Your suggestions, ideas, thoughts etc.
Road Hog Mad replied to Road Hog Mad's topic in Cabinet Building