Ginge Posted August 2, 2020 Report Share Posted August 2, 2020 Hi everyone I found an old 21” tv in the attic And some old mdf board that someone was throwing out the other day so I though I’d have a crack at a building a bar top cabinet my woodworking skills are pretty crap as you can see in the pics have put hinges on front so it lifts up for access to tv ,and on the Button panel so can pull it down to work on the button etc .Have ordered 2 x pacdrive for lamps and a I pac for the buttons which will hopefully come soon. Just thought this would be a good first build and a learning curve on how mfme works with a pac drive and a I pac. Wish I had done it in portrait mode now but never mind maybe the next one will be bigger and better Will keep you posted as project goes on. 4 Link to comment Share on other sites More sharing options...
davep180 Posted August 3, 2020 Report Share Posted August 3, 2020 Good luck in your endeavours ther Ginge. Are you doing coin in and hoppers too? Link to comment Share on other sites More sharing options...
Ginge Posted August 3, 2020 Author Report Share Posted August 3, 2020 1 hour ago, davep180 said: Good luck in your endeavours ther Ginge. Are you doing coin in and hoppers too? Thank you going to give coin and hoppers a miss on this one but maybe if I do another in the future I will give them a go Link to comment Share on other sites More sharing options...
Ginge Posted August 9, 2020 Author Report Share Posted August 9, 2020 Thought I’d post an update on my cabinet . Buttons arrived from eBay on Friday also the pac drive and I pac turned up An hour later so have been busy this morning and here is the result so far . Bought some black marble effect vinyl from Wilkinson’s at £5 each used 2 to cover the cabinet rather than paint next phase is wiring pac drive and I pac up that’s when things gojoking aside I hope not they cost me around £80 for the three boards and daisy chain wiring for the grounds on the I pac and +V on the pac drive, just seemed a bit easier than doing the daisy chain my self . I am going to do the rest of the wiring from scratch have ordered wire and 6.3mm insulated crimps To do the rest will do another update when finished wiring stage. 6 2 Link to comment Share on other sites More sharing options...
No1Stoney Posted August 9, 2020 Report Share Posted August 9, 2020 Looks smart that. I like the layout of the buttons for all different games. Especially the arrow buttons on the main panel. Good Job! 1 1 Link to comment Share on other sites More sharing options...
davep180 Posted August 10, 2020 Report Share Posted August 10, 2020 Looks good Ginge. Coming on nicely. The button configuration looks great. Can't wait to see it lit up in all it's glory! 1 Link to comment Share on other sites More sharing options...
Ginge Posted August 18, 2020 Author Report Share Posted August 18, 2020 Good afternoon guys Finally had time to finish wiring up the pac drives and I pac , turned out not be as hard as I thought it was going to be just need to sort out the pac drive Settings on the layout side next ,would like to post a video on here when it is finished could someone let me know how I Can Do that can’t seem to work it out. 4 Link to comment Share on other sites More sharing options...
Recommended Posts