Fruity Nut

Don't worry. Figured it out... You add art through the game manager

Took a gambling awareness sticker off my old reel king machine today. Cut it up and slapped it on my little cab to finish it off nicely

I don't know that one. I use Coin ops in an old arcade cabinet build but didn't know you can use it for mfme or it is touch screen compatible. I'll check it out but pretty happy with Touch Play.

I can't seem to work out where to place the logos for the different games in touchplay. I put the .png game logos in a folder in images called "wheel art" I believe and made sure they are named the same as each .gam file but they don't show up at all. Does anyone know? I can't seem to find out on the touch play forum. Thank you

So finally finished my small bartop icade conversion. The cabinet lent itself perfectly for the job although was certainly tough trying to squeeze everything in! So I bought off Ebay an ION Icade off eBay for £18, a HP 15" 4:3 touchscreen monitor for £12 and a Dell micro PC for £40. I ordered an Ipac, Pac drive and a load of buttons from Arcade World along with a Barcrest button and 5v leds off eBay. I had to cut the top pieces of the side panels off the icade to accommodate the monitor which I stripped out of it's casing. I wanted the sound to be pretty good as that's the best part for me, the nostalgic machine sounds and music so I fixed a 2.1 edifier PC speaker system to it. The sub on the top and the satellite speakers in the back as didn't want them sticking out. I simply used sticky back metal effect plastic on the sides. I replaced the control panel for a nice bit of wood. I used 10 main buttons, an exit button on the left side and a coin one on the right as well as 2 small buttons I use for volume under the fake coin slot which I wired to a USB on the PC. I am very pleased with the way it turned out

Right sorted! it was me! I was going to edit to assign the hi and Lo buttons after the lamp settings then clicking config on pac drive settings as felt I needed to save but that seems to duplicate the numbers like you said. Thank you very much guys

Okay so added the lamps as you said which makes them light when Hi and Lo flashes but they now they do not flash with regular holds. Holds still hold tho. Please see pics. Thank again

I haven't had a chance. I'm hoping to do tomorrow as wiring up some new buttons

Great thank you I will give it another go

I think I tried that but not too sure how to do it correctly in edit, design. I managed to get them to work but it stopped them flashing when hold should normally flash.

Gary will probably know this one... So on a game such as Viva Espana which has separate Hi and Lo buttons. I have edited the layout to use the Hi and Lo on my cabinets Hold buttons which works fine but how do I get them to flash when the Hi and Lo should flash in game but still flash when the holds should flash, essentially sharing the same buttons? Is this possible?

getting there now

yeah I didn't want both lit at same time unless I had money to collect and to cancel something if you get the jist. No worries

ahh no worries

Nice and tidy