EdwardFarmer

Yes mate I brought a sheet of ply wood and then draw on the shape you like and cut then copy that onto the next board

You can use any hopper if you use infrared sensors to register the coin output

Hey mate I can try help you along the way I have recently built my own cab fully working, it's not easy but with some help and guiding you will be good, build wise you can download a full build that's what I did but the games don't come ready with the coins and hoppers set up so you will need to go into each game 1 by 1 to change that ( that's the step IAM on now) its easier if you just have your machine take £1 and 10p coins but I wanted all amd I wanted 3 hoppers so I can have a 2p hopper also, there are plenty of guides on here but if you do get stuck just drop me a message, i have done the 2 screens but i think it is possible as there is a split screen option in the settings but i have never tried that, i just wemt for 1 full screen, regarding the buttons you can have as many as you like

Hey mate, I don't I just made it up as I went along, but I could get you some measurements if you like ? Also if you need help with anything else I can try point you in the right direction

Yh mate I think so also, Yh when I get some spare time I will try it mate and let you know

Thanks mate appreciate it

Yh I wish I put 4 hoppers in my build now as some of the token games I would like to have on my build, I haven’t tried 3 on one game at a time but I sure there would be a way to get them to work would need time to look at that

Hey mate iam sure it will, just let me know if you need any advice along the way, I pretty sure I can have as many hoppers as I want, I just use 2p, 10p, £1, when I play a game that is normally a 20p hopper I just put in the settings multiplier x2 on the 10p hopper to pay out 20p, I use a pac drive for mine mate

Ahh yh it is mate but i changed it as all my machines boot in full screen stretch in my cab so no longer needed it, I use F1 - F6 for coin input and then just standard 0 for £1 coins

Hey mate managed to solve it, it was happening on every layout, when i put 5p in i have it key binded to F1 on the keyboard it was double pressing F1 adding 10p to every game, the coin mech i am using is a CF126 Cash Flow

My coin mech is not taking 10p for each 5 p put in its sending 2 pulses is there away to fix this i have tried changing the mech that does not work

Looks great mate

Hey pal, yes mate, i went woth the 12v as found it better with the hoppers i used as when i used a 24v supply to them they ran to fast throwing out a few extra coins Regarding the bulbs i just used 5v as i power them from my pac drive 5v supply they seem bright enough for me, you just need to make sure you have the right bulbs I can sort you a GND diagram to how i did mine will tey sort that for you was pretty straight forward when i got going i just daisy chain. Regarding the heat from the TV atm my cabinet is open top and back so bot needed a fan yet can show you a pic of that also later when home. Also hear to help pal dont worry about asking i was the same got to learn somewhere as you want to get it bang on.

I have a 12v separate powerr supply in mine to feed the hoppers and coin mech, i found that a much better way than coming of the PC itself

Hey mate, i built one like a full cabimet using a 43" screen, there is someome on here who has converted a old machine but the screen is not that big so does not fit edge to edge if i was you i would build you own cabinet