[Cabinet Build No. 3 (Wall Mounted)]

Fanks,  just awaiting the supplier to send me another hopper when they have one (seems to be a shortage), looking at the size they sent me it will hold about 1,500£. I've asked for a medium bowl specifically as a large bowl won't fit. My original plan of over flowing coins won't work as I've run out of room but I'm not bothered to be honest, it'll hold enough lol.

Next job will be to fill any blemishes, tart it up and paint it.

Gloss or matt? 

[Cabinet Build No. 3 (Wall Mounted)]

A better video... 

 

[Cabinet Build No. 3 (Wall Mounted)]

Ok, so wired up a hopper and fitted a bell fruit payout tray... 

 

[Cabinet Build No. 3 (Wall Mounted)]

Ordered a payout tray just now from swallow amusements, still can't find any hoppers though!!

[Cabinet Build No. 3 (Wall Mounted)]

@Boulderdash lol, I needed a knob for the door, so yeah it one of B&M's finest. 

 

Here it is wall mounted in my cave under the stairs...

[Cabinet Build No. 3 (Wall Mounted)]

Another vid 

 

[Cabinet Build No. 3 (Wall Mounted)]

Getting there, tidied the wires up, and installed the software which needs tweaking a little as it was for landscape and not portrait mode. Next will be the hoppers and payout tray when I come across any.

[Cabinet Build No. 3 (Wall Mounted)]

21 hours ago, foiltravis said:

 

New video 

 

[Cabinet Build No. 3 (Wall Mounted)]

11 minutes ago, foiltravis said:

Attempted to watch your video but YouTube said it was set to private.

Try again, it's unlisted now rather than private. 

[Cabinet Build No. 3 (Wall Mounted)]

22 hours ago, Fishsta said:

2002...

"Hey guys, let's piss this forum off by being really annoying"

 

"Why not offer something constructive, Road Hog Mad?"

 

 

"Hold my pint."

 

20 years later.....

 

Seriously, good work, mate. Looking amazing.

Aged well haven't I?

[Cabinet Build No. 3 (Wall Mounted)]

Anyway, enough of that, back to the build...

Up and running sort of!

 

https://youtube.com/shorts/iz4yZbdxmEc?feature=share

[Cabinet Build No. 3 (Wall Mounted)]

ohh no lol

[Cabinet Build No. 3 (Wall Mounted)]

If anyone wants to contribute some Richard Brian sticker to the project you are more than welcome,  you'll have your own unique mark on a home build.

[Cabinet Build No. 3 (Wall Mounted)]

And for those who lost a crystal in the maze ...

 

Turned the crud power on off/usb thing in to something a bit fancier.

 

Holes are for the fans.

[Cabinet Build No. 3 (Wall Mounted)]

Bit of chrome surround to hide my crud cutting out and a little more progress inside. 

[Cabinet Build No. 3 (Wall Mounted)]

8 minutes ago, uptown47 said:

Calm down calm down...

Yeah like that but with an Oldham twang. I could just subtitle it, couldn't I?  

 

I've got 2 large cooling fans so will probably put them in after. One lower than the other so it gets good air flow, also the motherboard has spacers which probably can't be seen.

I've ordered some chrome sticky stuff off flebay too (to finish it off nicely) so I'll put that around the monitor when painted as I was pissed whilst using the jigsaw.

[Cabinet Build No. 3 (Wall Mounted)]

Remember Brookside? 

[Cabinet Build No. 3 (Wall Mounted)]

6 minutes ago, MPU_FIVE said:

Wow, that looks awesome @Road Hog Mad!!!!

.... I did wonder how you'd get a computer to fit in such a thin cab but the pictures have already answered that question.... bloody amazing job there, matey!

I'll do a video when it's all done but it'll be muted as I sound odd. Scouse, Wooly Back Oldhamer.

[Cabinet Build No. 3 (Wall Mounted)]

A little more process this afternoon Installing some wires etc. A redundant i3 8gb motherboard, already have a 128gb ssd hard drive and 2gb low profile graphics card, did a quick power up and it booted to dos so it looms like it's good.

[Cabinet Build No. 3 (Wall Mounted)]

This evening 

[Cabinet Build No. 3 (Wall Mounted)]

@dondplayer no, 1982 lol.

@woodsy it's looks a little rough at the moment but gimme some time lol, problem is its time consuming plus I need not to drink when using the jigsaw haha. 

@foiltravis Thank you

 

[Cabinet Build No. 3 (Wall Mounted)]

@foiltravis

So now you can see... the monitor will sit in the door like this... 

I decided to put the coin mechs down below which will go direct in to the hopper with a cut out in the door for the coins to spit out in to the payout tray.

That's enough for tonight.

 

@Reg

[Cabinet Build No. 3 (Wall Mounted)]

On 08/01/2023 at 20:47, foiltravis said:

WOW!!! I will be following this. Getting everything into a 6 inch thick box will be amazing.

Or impossible lol.

I think it can be done. I've altered my original design, a lot of stuff will mounted on the front including the hoppers and coin mechs. It will also be a front opener. Gonna see if I can get a but of cutting done this evening and will of course upload some pics.

 

Edit. Picked up some wood from b&q last night and they kindly cut it fir me. £33 a sheet of wood and nails.

[Pac Drive]

'Always off' as if you use hoppers later on they'll spit all of their coins out.

[Help with a Microswitch]

Thank you! If I blow myself up I'll be doing myself a favour lol.