Daveflores331 Posted March 29, 2018 Report Share Posted March 29, 2018 Can somebody kindly tell me how I clear a coin mech error on mfme v6 please ? Link to comment Share on other sites More sharing options...
wearecity Posted March 29, 2018 Report Share Posted March 29, 2018 (edited) For best advice, you'll need to post up the names of the layout/s you are having trouble with. Many times, it's a case of going into design,edit, then clicking on configuration panel and choosing Parallel or Binary under coin mech on that screen. You may need to reset the machine by pushing ctrl r on your keyboard and then wait until any alarm clears. Alternatively, you may need to go into design, edit, then right click on the coin mech itself on the layout and choose properties. Then choose the correct coin from the coin/note drop down menu. Edited March 29, 2018 by wearecity 1 Link to comment Share on other sites More sharing options...
Reg Posted March 29, 2018 Report Share Posted March 29, 2018 5 hours ago, Daveflores331 said: Can somebody kindly tell me how I clear a coin mech error on mfme v6 please ? Would also assist us to help you if you could post the layout that has got the problem - just incase there is a further problem. Link to comment Share on other sites More sharing options...
Daveflores331 Posted March 29, 2018 Author Report Share Posted March 29, 2018 the current problem is on deal or no deal CYBTB and deal or no deal deal wheel Link to comment Share on other sites More sharing options...
wearecity Posted March 29, 2018 Report Share Posted March 29, 2018 3 hours ago, Daveflores331 said: the current problem is on deal or no deal CYBTB and deal or no deal deal wheel Have you reset the ram on them? Link to comment Share on other sites More sharing options...
Recommended Posts