cja272 Posted January 27, 2022 Author Report Share Posted January 27, 2022 Yes just check power supply and that’s fine so I really don’t no Link to comment Share on other sites More sharing options...
cja272 Posted January 27, 2022 Author Report Share Posted January 27, 2022 Ground on I pac then touching number 1 on photo on pac drive shows this Link to comment Share on other sites More sharing options...
cja272 Posted January 27, 2022 Author Report Share Posted January 27, 2022 Here is how ive wired it up etc anyone see anything ive done incorrectly please??? Thank you Link to comment Share on other sites More sharing options...
cja272 Posted February 5, 2022 Author Report Share Posted February 5, 2022 The hoppers are now working fine , the problem was that the hoppers whete being powered by a transformer and did not share ground with the ipac and pacdrive so the solution was to power everything from my pc cable and it’s all working fine now . just need to start making a cabinet now ! 2 Link to comment Share on other sites More sharing options...
cja272 Posted February 5, 2022 Author Report Share Posted February 5, 2022 I cut the cable here in the photo on my laptop this is 20v and is enough power for my 2 hoppers and my coin mech Link to comment Share on other sites More sharing options...
Reg Posted February 5, 2022 Report Share Posted February 5, 2022 2 hours ago, cja272 said: just need to start making a cabinet now ! Lovely - so let's place bets on what else will go wrong ! You have had an awful time with this - but so glad you are there. Measure twice, cut once if you know the phrase. ...and by what go wrong - something will - it's a miracle on this part of the journey to be 100% everytime. That being said - this is the best part - the journey you are not about to take. Enjoy the building of it - don't try to be speedy like @Road Hog Mad as he is a speed god when it comes to this, take your time. One tip - label all the wireing at both ends for example... ...with tail ends and footer ends labeled, troubleshooting becomes way easier. Good luck and really looking forward to you posting your final cab pics in this thread ( and also copied into the pinned thread I have ). 1 Link to comment Share on other sites More sharing options...
Road Hog Mad Posted February 5, 2022 Report Share Posted February 5, 2022 @Reg I had the Police on my ass! 1 Link to comment Share on other sites More sharing options...
Recommended Posts