[REFLEX Roms]

45 minutes ago, andy-1 said:

Which clubbers haven't been done as I may take a look. Or even the remaining AWP that are left to be emulated.

I have club cave man cash sorted but I can’t be arsed to do classics to much writing out text etc I’d rather it be dxed 

But saying that if I’m bored I may complete it classic-wise

[REFLEX Roms]

2 hours ago, SocialDragon368 said:

I can see a few clubbers have not been done yet. Also AWPs.

All in good time unless you wanna make a few classics? Sc5 isn’t that much different to sc4 , ok more to set up but that is it

[Any information on this machine?]

30 minutes ago, infection said:

As for money spinner no clue

It’s either a clubber or a four reeled awp

as for lucky star it also looks very blue chip company going by the reel symbols and stars I’d also say it’s on £2 cash so a £4 jackpot

[club plumb crazy -qps]

40 minutes ago, merivaman41 said:

Hello i have this layout running but the sounds are missing or are just to low is there a way to increase the sound?.
Many thanks in advance.

Some layouts you tick dip 6 on, bank one in configuration then tick refill it may have the start button flash if so you can toggle through until you hit the sounds and then press hold 1 till you get to 100% 

[MFME - IMPACT TECH SLOWDOWN]

2 hours ago, thealteredemu said:

Ahh, so unpack blended lamps on load option cures this issue.  I'll get my coat

I just saw in preferences

J

Not all the time but may speed the layout up via edit mode goto tidy then unpack blended lamps 

[MFME - IMPACT TECH SLOWDOWN]

1 hour ago, Spidy21982 said:

@thealteredemu

 

in mfme is an option to unpack all blended lamps .then you have no slowdowns at all. had this on my sinbad release .

greetings spidy

Yes this does work and speeds the layouts up 

I’ve done this on partytime multiplayers as they were stuttering on lappy after that they were fine 

also if the layout is of a over large size it slows down

i remember wizard once said “although mfme is capable of almost life sized layouts there isn’t any need to make them that big as most people wouldn’t have a monitor big enough to appreciate the size made” also I made a layout which used a blended lamp which was too big and it didn’t need to have all the lamps used in the real machine 

most dual lamps in a real machine are only there incase one blows, in mfme’s case no lamps blow so the majority of lamps aren’t actually needed

also I recall the blended mask on layouts are sometimes bigger than what they need to be as in too much fade/glow. 
deffo unpack the lamps in edit mode

[Has this been done before?]

I’ve done this before with cash counter the layout used I’d say around 80% real lamp images 

it is possible if you had a camera on a tripod so the whole machine or sections were in view. The machine would do its attract thingy whilst the camara would take several shots of which you’d then have perfectly aligned images of the machine In it’s Off state and lamps on state 

probably wouldn’t be so pixel perfect if using a handheld device

[My "consecutive losing spins" experiment - DOND Edition]

6 hours ago, geordie52 said:

u must like noel lol

Not now he don’t I bet he even hates the program and maybe even neol himself

[BWB Monte Carlo or Bust DX]

51 minutes ago, thealteredemu said:

Could someone upload an old BWB DX layout I did for this machine, was a few ago, I just want it to start building my new baby cab version of the same game

Many thanks if anyone can help

J

I’m sure my oldie layout Reno reels ‘classic’

wasnt locked or red hot poker, there’s a few made for v6.1 so won’t be locked 

not on lappy atm so can’t upload one

[DX'Cellent Art Archive]

Thanks for the offers I’ll take a look at bank a note and bank chase

[Recommendations for fun machines by default.]

15 minutes ago, OmniUK said:

Hi there,

Recently registered to try and relive some of my youth, not yet found the machines I'm aching for, but I'm struggling in the memory department.

Whilst I work all of that out, does any one have any good download suggestions for machines that are "fun out of the box"? 

I don't really have a particular preference for machine type, I played from late 80's upwards. 

Anything with a jackpot of £4/£4.80-£6 token jackpot there’s loads to choose from 

[dowloaded file]

Also place the un zipped files into a brown folder with the machine name then Place  those into a fruit machine file 

[Global warped]

Only one way to find out, does anybody have said roms even if bellfruit and I take it still no sounds for it? 

[Electrocoin Vegas Strip to MFME project.]

2 hours ago, Road Hog Mad said:

Mine is similarly situated to yours and isn't floppy. lol

Ooh matron!!!!

[Still new but ready to learn]

Iirc the only way wizard could release mfme v5 was to acknowledge the mame developers and I’m sure it had to be or some of it open source 

so to keep mame happy he included the thanks etc within mfme warning notice which is read upon loading for the first time

Either way wizard expressed his work to be “locked forever “ probably due to the shitstorm over the leaked v9.4/9.9.

i was reading via the mecca even this latest v5 and subsequent version may never of been released due to some comments made via another site. So at the end of the day be grateful for the last eight years worth of emulation 

As for the Mfme in reality it’s just a computer program and I’m sure it could be opened up if you know how to open high security programs and this I doubt is that highly secure but how much code and data is within , who knows

one day when I’m 80 mame will have eventually caught up and fme will be a distant memory for us mortals 

remember nothing lasts forever, enjoy the here and now!!!

[Electrocoin Vegas Strip to MFME project.]

Take care slots, hopefully she’ll get better and be back home soon 

[Concept - Go For Gold £8/£15/£35/£70 (Phoenix 2) - Kinda works - anyone fancy assisting?]

37 minutes ago, slotsmagic said:

I've just tried your suggestion, many thanks

Unfortunately it still does the same - but now gives a couple of spins before it seems to be unable to see the opto

It might be that it's just going to be impossible to get going, but it would be lovely to see that even though the machine is physically no more (metalwork and woodwork going to the tip tomorrow), it could live on in some regard

If you did fancy a tinker with it I'd be happy to send anything over that might help

was trawling through past wips of mine and super red bar came up. the reels were out of line but @Tommy c sorted em out

do you have the Wip layout to hand?, have you a image of said machine 

[rank]

51 minutes ago, madhattter96 said:

when I look at my rank it appears in Russian? is this me issue?

It’s Greek I think

[Help with Alpha abbreviations]

12 hours ago, partee said:

Yes i know, i wrote the wrong platform it is (S4) lol . ok this is where i am at right now and also stuck, i need a little bit of help on lamping that's my next step

i have all the lamps mapped out but i don't know how to apply them to the layout here is a screenshot of how it is 

 

Great work so far I take it you’re plunging further into the fme creation pool and turnIng this into a dx seams a shame to waste a decent looking flyer

[Help with Alpha abbreviations]

5 minutes ago, hitthesix said:

It is one of the lamps for the BOTTOM name i.e bt  =bottom br- s= name =  bars 7s

Bottom top or bottom right (BT/BR)? 
lamp 16

[Hello everyone newbie here just trying to learn how to design my first layout]

Long time ago but I learnt the basics from a guide by hitthesix and Ross although I had massive help from the other excellent creators at the time

tommy c, ploggy, dad, pook, ady the list is endless all the best imo. Still get help to this day and I’ve made 599 so far…. 

[hello averyone, i am new to MFME and i will like to learn the to design layouts]

9 minutes ago, Ze Frog said:

You will need to find an image in Infections Images section, or online. Then you will need to use Photoshop or similar to make the image how you want it, starting with an off image. Once off image is done then take that image and lamp each part that needs lighting and save as on image. After leaving Photoshop you will need to convert whatever format you are using to .BMP file.

It's actually pretty easy, I've only been creating for a year, but once you get the jist of Photoshop it's really not too bad. I'm still learning though, but creating far better than where I started, so in another year hopefully even better.

Good to see another newcomer ready to give it a go. I started firstly by doing a classic, I strongly advise giving that a go just to understand how things work more. I used a classic already done, but figured out the lamps and buttons 95% myself and used the original layout to check afterwards to see if I had the correct lamp numbers etc. Be warned, lol, once you start it's pretty addictive after the first stage, admittedly the very start was a bit of a chore, but I don't really like being defeated and with the help of others along the way got a relatively good grasp on things.

Still hit the odd snag, which can be annoying, but always someone willing to help if they see you putting the effort in.

Get you image/flyer then always firstly convert it to bmp as that’s format won’t lose quality we’re as jpeg does 

do this before resizing or off/on images 

[Einstein Genius Jackpots]

@dad i think has dx'ed this although may not be released to being too new atm

[Can't just be me...]

Did you rename the mfme app to say mfme v19 if so it won’t run I did this when it first came out, leave the file name as is.

maybe someone could PM you a fresh copy then you could delete yours and reinstall it.

have you had any other mfme emulators running? 

[Nudge up - Where did they go]

The nudge up feature seams to have disappeared in the 1990’s what was the last machine to feature this I suppose the reflex each way nudger still has it?