Quattrohead Posted January 8, 2021 Report Share Posted January 8, 2021 Anyone know if this works with MFME ? I am thinking it would be convenient to run the switches and lamps off one board. Ta. Link to comment Share on other sites More sharing options...
Quattrohead Posted January 19, 2021 Author Report Share Posted January 19, 2021 Any ideas ? No one has tried this or knows if these boards are handled the same way by windowz. Link to comment Share on other sites More sharing options...
slasher Posted January 19, 2021 Report Share Posted January 19, 2021 If they're compatible with ipac/PAC drive style programming then it probably would but I doubt anyone's tried it unfortunately Sorry can't be of any nope help Link to comment Share on other sites More sharing options...
gareth_iowc Posted January 26, 2021 Report Share Posted January 26, 2021 This board is not supported by MFME You need the pacdrive special type to drive lamps and hoppers and an I-Pac for button inputs Link to comment Share on other sites More sharing options...
Quattrohead Posted February 16, 2021 Author Report Share Posted February 16, 2021 I just got a PAC drive today and rigged it up for a super quick test, works well as lamps and triacs. However, now under effects I cannot select a triac effect. Is this a feature ? Long term it won't matter as I intend to use a payout solenoid for all coins, just puzzled by this. My cabinet will likely be a simple 1 coin/token in with 1 tube. Can you assign multiple triac outputs to 1 PAC drive output ? I am going to use an opto-isolated relay. I apparently cannot remove the PAC drive from MFME now either. Link to comment Share on other sites More sharing options...
Recommended Posts