toptrumps Posted May 4, 2020 Report Share Posted May 4, 2020 Hi So I have about 400 legacy layouts and I've just read you can convert these to work in v.19. I'm back after a 15 year break and wondering Is it worth doing this or have most of them been re-done over the years anyway? Link to comment Share on other sites More sharing options...
Geddy Posted May 4, 2020 Report Share Posted May 4, 2020 HI, I'm currently working through them all, I'm up to T's in Barcrest. After Barcrest, BWB, JPM and BFM are done it's going to be a matter of days. If I keep going the rate I am I should be finished the whole collection in about two weeks depending if real life gets in the way. I will eventually get them all done though. You can open an old .dat in v5.1 then save it as an .fml so it will run in v19 but of course it won't always have the tweaks that are possible in v19. That would have to be done separately. Good luck. 2 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Recommended Posts