woody01704 Posted October 19, 2022 Report Share Posted October 19, 2022 Hi Hope everyone is well. I have just started getting back into MFME on a vertical monitor setup. I was just wondering if there was a way to crop a layout created for a horizontal display where the machine is in the middle. If the machine is to the left I've been able to adjust the screen size and cut off the right hand background but struggle to remove anything to the left. I had a look in the forums and a couple of posts suggested using the "crop" tool but I can't for the life of me find the tool in design mode in MFME (I'm using 20.1) It is probably right in front of me and I keep missing it, but any help would be greatly appreciated. Thanks in advance for any help and many thanks for all the great layouts and emulators. I had forgotten how fun this was. Woody Link to comment Share on other sites More sharing options...
Ginge Posted October 19, 2022 Report Share Posted October 19, 2022 Off the top of my head you go to window/left click and then down to set cropped region also you need to go to file/preference’s and tick the box that says load cropped, Hope I’m right don’t have a pc to hand to double check. 2 Link to comment Share on other sites More sharing options...
woody01704 Posted October 19, 2022 Author Report Share Posted October 19, 2022 Brilliant, I'll have a go at that when I get home from work. Thank you for the advice. Link to comment Share on other sites More sharing options...
woody01704 Posted October 19, 2022 Author Report Share Posted October 19, 2022 Works perfectly. Thank you again. 1 Link to comment Share on other sites More sharing options...
Recommended Posts