-
Posts
294 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Articles
Posts posted by Robsonmeg46
-
-
is there a way to get the pressing of the esc button twice to exit a machine down to 1 press ?
cheers rob
-
Thanks guys for the help I am going through my collection slowly of 1998 machines and making a list of what works and what doesn't or have errors would it be OK to keep posting the errors here when I find them and ask u all again for help. ( it will take a long time as like all of u I have work and a family lol)
Many thanks again Rob
-
3 minutes ago, dondplayer said:
If you leave the Poker Face about 10 minutes (yes that long) it should initialise
Cheers yes that worked it was a long time lol
-
-
ok club cash crusaders i have the 48 on/off alarm after the sound stops it stays on 48 on/off alm and does not do anything for quite a while its a long wait but then i comes alive
-
@WonkySausagecheers man all good thank a mill
- 1
-
54 minutes ago, WonkySausage said:
So i can sort Game of Gnomes and Club Treble Top.
Assuming you're using MFME 20.1:
Game of Gnomes -Tap on Design and go into Edit Mode, Open Service Door by ticking S Door, go into Configuration options
Make sure Note Acceptor, Hopper 1 and Hopper 2 have DES ticked and that note acceptor has GB2 selected underneath (as I think when you download it, the note acceptor might be set to GB1 which might be causing the error) . Basically you want the values set in the photo below
Then, Tick Trusted underneath Note Acceptor, Hopper 1 and Hopper 2.
Hit Ram Clear, let the game do its thing to boot up. As it's initialising, the 3 ticks underneath DES will disappear as this is the machine pairing the coin mechs and note acceptor... and make a cup of tea whilst it sits through the SND CHK from 1 to 100. If (When) Succesful, the display will say £1, 10p and Note acceptors are trusted.
Untick service door so the machine reboots, and come out of edit mode then you should be good to go.
Make sure you save the layout too - Design, Layout/Game, Save Layout
Basically do the same for Club Trable top as well.
@WonkySausagethanks for this i did what u asked and it worked for the Game of Gnomes now to try the other one
- 2
-
The four Reflex that not working for me I download from the legacy collection
Cash Crusaders. Parts missing
Club Cash Crusaders parts missing
Club Treble Top. 16 note acc error
Game Of Gnomes 16 note acc errorNo matter what I do I can't get these to work would appreciate any help to get these up and running
May thanks rob
-
What front end do people use for they fruit machines?
I am currently using retrofe but I am looking for a full touchscreen frontend if anyone kowns one then please let me know many thanks rob
-
2 minutes ago, Amusements said:
Doesn't that time out and boot up? I get that all the time because I always wipe the RAM on a new layout. Then I have to go through the fill the hopper and up the sound stuff.
cheers yes they are both very slow loaders
-
-
-
2 minutes ago, wearecity said:
In the configuration screen, untick both hoppers.
Cheer will give this ago this evening when I get home thanks very much
-
1 minute ago, woodsy said:
ctrl & e (edit mode)
configuration
untick hopper1 and 2
ctrl & r (restart)
Cheer will give this ago this evening when I get home thanks very much
-
Good afternoon just wanted to ask how do u stop the hopper sound as a few of my machines when u launch them the hooper sounds constantly.eg
Who wants to be a leigionare (hopper sound constantly)
The prize is right (hopper sound all the time can't stop it)
The Italian job-Mazooma (hopper sound all the time can't stop it)
There are probably more but I have to go through 1970 of them to find them all lol some have other errors I need to make a full list of what is workimg anf what is not lol
Ps I have done the usual thing tick or untick the s/door and the c/door and they still do it
Many thanks rob
-
5 hours ago, cja272 said:
cheers windows defender says its not safe is it ok ?
-
9 hours ago, woodsy said:
Think you’ll be fine, there are several more qualified to answer if needed, a side note is for arcade simulator You have more need for better specs there’s thread in the area for more info if necessary for you. Good luck
Cheers what is arcade simulator? And where could I get it to test out on my home pc for now. Again thanks guys for the fast responses
-
2 hours ago, woodsy said:
Bifocals! or windows! I’ve never had any issues with 4gb ram and i3 9 year old hp laptop. Are you having issues?
Not yet I was just asking as I wise to purchase a secound hand surface pro for playing mfme while travelling and at work thanks for the fast response guys
-
What is the best specs please for running mfme. V20.1 I wish to run it on a surface pro if I can many thanks rob
-
Has anyone got this to work on v20.1 I did what it said make a new layout in 5.1 and it still doesn't work many thanks for ur help rob.
-
5 minutes ago, woodsy said:
One thing is you will need to wait and accept the terms and conditions each time you switch between mfme’s that’s the case when changing a .dat - .fml if that’s the issue you mean then no you will have to accept them as they end but if you leave them running I’m sure it will be fine
Yes that's the problem OK thanks for that I will do more testing tomorrow maybe I have to adjust the timing on my.. Bat files maybe that will work
-
9 minutes ago, cliffc said:
These should work with no issues as they both use the same DB
thanks but i can seem to get them to work
-
9 minutes ago, cliffc said:
Hi
Depends which 2 versions you want to run V5 and V20 will use the same DB so you can run both of these together.
v19.8 and v20.1
-
Good day a newbee here just wanted to ask is it possible to have 2 versions of mfme sharing the same database without have to load each one again and again after using the other.
Cheers Rob
Mfme update
in Newbies Help Area
Posted · Edited by Robsonmeg46
Has anyone had a update today for mfme