Hi guys,
Can anyone help me get the PAC Drive configuration working or point me in the right direction? I'm in the process of building my MFME cab and I've bought an Ultimarc Ultimate IO board (this one https://www.ultimarc.com/control-interfaces/i-pacs/i-pac-ultimate-i-o/). I've got the buttons working okay but having problems with the LEDs.
I've tested the LED part of the board with LEDBlinky and I can turn on my LED with the Blinky "Simple LED test" but I can't get MFME19 (or prior, 6) to lite the LEDs.
Can someone walk me through setting up MFME please?
This is what I'm doing to test in MFME
The Ultimate ID of the board is 1 - verified by blicky test.
1. Loading a game (MonteCarloBust) - Note that the game can't be saved, since I didn't' create the DX - I wondered if this was the problem?
2. In MFME,entering "Edit" mode to obtain the lamp for the Start button (in properties of the start button is says Lamp=41).
3. Clicking on "Configuration" in MFME and adding a new entry
Output = 10 (the LED is connected to 10 and works with Blicky)
Label =START
Type = Lamp
Lamp1 = 41
4. on the MFME config screen "Ultimate10" appears in the 4th box (for right) at the top where it displays whether it's recognised the board.
I've tried, SAVING, TESTING, CONFIG, etc but I can't get the LED to lite. The game is running and the start button is flashing too.
any help would be great?
I wanted to upload a couple of screen-shots but I get a 201 error on the forum and receive an "Upload Failed" message (do I not have rights to upload? the files are only a 300K each.)
Many thanks,
Graham.