Project Treasure Trail DX - By Jamie28 1.0.0

Thank you.

Sorry to ask but when i run this it says error E 404 where the credits are and just beeps.

Edited October 16, 2023 by merivaman41

I get the same error that just beeps, I am totally blind though so would not be able to fiddle with the settings to check it.

Just leave it to time out. Credits can be added after about a minute. Maybe turn off sound while waiting!

Thank you for this matey

Many thanks, 

 

Sorry guys if this is erroring.  I have not had issues running it in MFME version 20.1, but will look into it further. 

Thanks

Another way to let the machine run properly is to delete the ram file and run it, it'll do rapid bleepbleep type things and then start normally.

Thanks for this one

I noticed that when collecting the nudge feature, the collect button didn't work?

It seems it should be the feature/stop button that should light up?

Edited October 17, 2023 by Multi Retro Man

On 16/10/2023 at 19:15, davep180 said:

Just leave it to time out. Credits can be added after about a minute. Maybe turn off sound while waiting!

Thank you i found that after leaving it for a while it does run then i saved it and its all good now so

great machine thanks for the upload will have a play now 

I have got to the bottom of the button issues! I had this when I made the classic years ago. There is two version of this, and the cancel and collect should be the same button, so both lamp 83 and the feature button lamp is 51.