Tolax Posted February 22, 2022 Report Share Posted February 22, 2022 Fun winter project. Wanted an all in one machine that could play fruit machines, pinball and arcade games. Purchased an Atgames Arcade Legends Pinball Table, the vips board and the arcade control panel - (https://www.atgames.net/arcades/legends-pinball/). Cost was around $1K time I purchased cables and a few other things. Connected up an old PC I had lying around and installed PinUp Popper Baller Installer - (https://www.nailbuster.com/wikipinup/doku.php?id=baller_installer) Couple of hours later I have a machine that plays MFME, Addams Family Pinball, FX3 Pinball (steam) and MAME. Using the control buttons on the panel for most of the Fruit Machine controls. The trackball acts as a mouse for some of the tables with lots of buttons. Still lots of config needed (graphics etc) but I just played Cash Explosion for an hour instead of configuring more so I put that down as a success. I can post the PinUp Popper config screenshots if needed. Took a little figuring out (well cribbing from people smarter than me). Pictures attached. It was a garage project...... Apologies for the quality. Clean up will come later Tolax 3 2 Link to comment Share on other sites More sharing options...
designone60 Posted February 11 Report Share Posted February 11 That's great!!! How did you set up MFME in Pinup Popper. What kind of launch script did you make. Link to comment Share on other sites More sharing options...
Recommended Posts