Psycon

Hey all. Ok I have now ordered buttons, switches, led's, pacdrive, i-pac and cables. My next thing is getting the cashflow 126 dfx and the azkoyen parallel hopper. Is this the only hopper that you guys recommend? Also can it be any parallel hopper or does it need to be the azkoyen parallel hopper?

I have found a site that you can buy all the switches and LED's separate so I will get them that way ty

Thanks for the link! Really helpful. I have been looking at buttons and ideally I want about 44mm square buttons. I can't find any that are 5v. They all seem to be 12v. Does anyone know anywhere that does them with 5v led's inside?

Hi everyone. I am going to build a cabinet but want to get all the mechanics setup before I do this. I have read through the forums and so far have a list as follows. I-pac Pacdrive special Cashflow 126 dfx coin mech Azkoyen parallel hopper Buttons I will first get the pacdrive and I-pac and buttons and see if I can wire them up first. I should be getting a pc with a 42 inch screen which I will work into the design. I have no idea how to wire the pac drive to the buttons yet. If someone can point me in the right direction for how they are wired. Must be one circuit for the led's and another circuit for the button press? Am looking forward to building this

Hey. When I run MFME it's runs great. The issue I have is when I run a machine the sound only comes out of my right speaker. When I test the sounds it comes out of both speakers. The problem only happens when I'm playing the machine. I have this problem with different machines so am thinking its something to do with the emulator? Has anyone else had this? I did have a look through the forums but couldn't find anything