-
Posts
131 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Articles
Everything posted by 123
-
Thanks for the offer But I’ve had a look at the mech and decided I’d be able to make something to hold it in place and funnel the coin through. But Thanks again
-
Hi Pete, are these called Molex connectors so I can have a look on eBay for some
-
Hi could I have a link for the coin mech holder and coin chute you used please. Thanks
-
Hi do you no of any connectors I can buy for these pins I was wondering if these would do https://www.ebay.co.uk/itm/2-12-Pin-2-54mm-KF2510-Connector-Sets-Housing-Header-Crimps-Molex-KK-Style/232301658339?hash=item36164200e3:g:pQQAAOSwU8hY79bs&var=532917407725 Thanks
-
Thank you No1Stoney this helps a lot! Thanks again
-
Hi No1Stoney just a few questions I have as I’m trying to get my head around wiring this mech! Where do these inputs wire to ? As I’m going to use a 12v psu instead of a pc molex. Also on the IPAC which inputs do these wires go to? Thanks
-
My coin mech has just arrived and I was wondering if anyone could help me at all with the wiring ( to the IPAC etc) as I’m not great with wiring! Thanks
-
Thanks No1Stoney I will keep adding updates throughout the build
-
Hi I’ve just ordered And About that Y chute could I not just make a my own chute for the coin to go to the mech. I’m going to start the build next week, so thanks for all the help and I’d imagine a lot more help along the way Thanks again
-
What coin entry do I need to buy if so ?
-
No1Stoney if I bought this Would I need to buy a coin entry? Also would you be able to send a wire diagram? Thanks
-
Would this work I think it’s parallel? https://www.ebay.co.uk/i/254599467541?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=254599467541&targetid=909953938039&device=m&mktype=pla&googleloc=1006723&poi=&campaignid=10199419171&mkgroupid=101401892625&rlsatarget=aud-381667281083:pla-909953938039&abcId=1145983&merchantid=6995734&gclid=EAIaIQobChMI5d6q3pyA6wIVWu3tCh3udwMrEAQYASABEgIZd_D_BwE
-
Thanks for the info No1Stoney I was just on eBay and it was the cheapest one that is why I was looking at it
-
Would this coin hopper be ok to use? https://www.ebay.co.uk/itm/AZKOYEN-1-COIN-MEDIUM-BOWL-HOPPER-UNIT/274411521916
-
Will 4 usb slots be enough to make the full machine do you think?
-
Ah right so if I use 5v leds I won’t need an extra power supply and the board won’t blow! Thank god I didn’t rig anything up No1Stoney if I buy those leds will they easily replace the bulbs or do I need new fittings for each button Thanks again Wizard and No1Stoney
-
Would I be able to use a 12v power supply such as this ? Also I think the buttons I have ordered have 12 volt lights so would the wiring diagram have to be like this ? Do the buttons wire up to the IPAC and the light part of the buttons wire up to the pacdrive or do they all wire up to 1 board? thanks No1Stoney for your reply’s
-
Hi I’ve just bought these So will these Led buttons all work from an IPAC? I am going to be using 15 led buttons all together. For the coin mech and hopper how would I connect them using a molex? Is this the molex connector that I should use and how do I use this on the pc? Thanks
-
Hi No1Stoney, thanks for replying. If I had this would I be able to wire the buttons, coin mech and hopper or would I need multiple boards? Can you configure what each button does in MFME or does each button have to be wired in the correct inputs? Also would I need additional power for the hopper and coin mech? Thanks
-
Hi I’m new to MFME altogether but I would like to build a cabinet in the future but I have a few questions if anyone could help Do I wire hoppers and coin mechs to a PacDrive or an ipac? what are the recommended hoppers and coin mechs to buy? can you program the coin mech (for certain credits inserted) and the hopper to payout the right amount on MFME? sorry if these are simple questions but I am completely new to this and I would be appreciate it if anyone could help thanks!