pilsburydoughman Posted December 2, 2020 Report Share Posted December 2, 2020 Im not totally up to speed with the emu technology - but ive been playing GGG, and ive got one slave open along with the top box - however ive got the GG feature, and the LCD says "busy", and the top reels dont spin . Any help be appreciated Link to comment Share on other sites More sharing options...
bullionbars2011 Posted December 2, 2020 Report Share Posted December 2, 2020 press FN and L top top box then should work Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 2, 2020 Author Report Share Posted December 2, 2020 (edited) At what point would you do that, I just tried it whilst in the above scenario, and it didnt do anything. Im using 20.1 Edited December 2, 2020 by pilsburydoughman Link to comment Share on other sites More sharing options...
Amusements Posted December 3, 2020 Report Share Posted December 3, 2020 If you are using MFMEv10 you need to load the top box first, so the top box is "in focus". Then you can do as bullionbars2011 mentioned. Treat every day like your last, because one day it will be! Fruit Machine <<<My new project! Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 3, 2020 Author Report Share Posted December 3, 2020 Tried opening it in 10.1a, and its coming up with "invalid stream format" and not loading the machine. Link to comment Share on other sites More sharing options...
wearecity Posted December 3, 2020 Report Share Posted December 3, 2020 I think that was a typo by Amusement. I'm not at home, so unable to check, but you need to open it in at least whatever version of the emulator, it was produced in or a later version. Should be fine in v20.1. Unless they are already linked, try opening the top box first and let it fully initialise then open the slave/s. If they are linked already then opening the top box will open the slave/s that are linked to it. In that case you might need to unlink them. In the installation directory for MFME you should find a text file with all the keyboard shortcuts I think it's called tips. The link/unlink keyboard shortcut should be in that. Alt L and Alt U, spring to mind. 2 Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 3, 2020 Author Report Share Posted December 3, 2020 Appreciate everyones input up to now, shall try once im home from work. Thank you kindly 1 Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 3, 2020 Author Report Share Posted December 3, 2020 I must be doing something wrong, I just cannot seem to get this to work? I seem to remember that in a previous emulator, you have to do something with the IP addresses of the slave and top box? Ive tried opening just the top box, let it get into attract, and then open the first slave, unlink them and then link them, and it still says "busy" when getting the golden game feature. I apologise if im being special here. Link to comment Share on other sites More sharing options...
pilsburydoughman Posted December 3, 2020 Author Report Share Posted December 3, 2020 Its ok, I was being special. Alt and L was the buttons I needed haha. Thanks again folks 2 Link to comment Share on other sites More sharing options...
Recommended Posts