gareth_iowc Posted November 29, 2020 Report Share Posted November 29, 2020 Hi All, Are there any tips or tricks when it comes to configuring lamp outputs? Currently i'm going into the layout edit to find the lamp number then setting the lamp output manually and repeating this for any machine i play. Same goes for setting up button inputs Link to comment Share on other sites More sharing options...
No1Stoney Posted November 29, 2020 Report Share Posted November 29, 2020 Yes, define the shortcut of the button you need for each lamp on your pacdrive. Press 'config' under pacdrive settings. This will assign the lamp number which corresponds to the 'shortcut key' of that particular button, to all of your pacdrive lamps. For example. Start button is 'SPACE' . So define Pacdrive (OUTPUT NUMBER) to 'SPACE' Repeat this for all the diferent buttons on your cabinet. Then press 'Config'. It will then assign the lamp numbers from each of those buttons to your pacdrive settings. Save this config... For each layout, use the SAME SHORTCUT buttons for every layout.. Load Config --> 'Config' button Sorry if this isnt clear. I can't think of a better way to describe it 1 Link to comment Share on other sites More sharing options...
Recommended Posts