loo Posted November 27, 2020 Report Share Posted November 27, 2020 hi i have an astra i am messing around with, but i keep getting the error 4.1 hopper liner. i believe the error is because the hopper is not detected, because it wants to use hopper 2 as the primary hopper. how do i get mfme to use the second hopper. i have tried inverting the hopper but it doesnt fix it. im stumped. Link to comment Share on other sites More sharing options...
dad Posted November 27, 2020 Report Share Posted November 27, 2020 Normally it’s check box 11 to override this message on Astra’s. 1 Link to comment Share on other sites More sharing options...
loo Posted November 27, 2020 Author Report Share Posted November 27, 2020 thanks for that, where would i find check box 11. Link to comment Share on other sites More sharing options...
Tommy c Posted November 27, 2020 Report Share Posted November 27, 2020 Add a button to mfme in edit mode,go to properties change the button number to 11,then right click your button got to convert then selct button/checkbox then tick the box,exit edit mode and save the layout via F7 1 Link to comment Share on other sites More sharing options...
loo Posted November 27, 2020 Author Report Share Posted November 27, 2020 it didnt work but then i have probably done it wrong, hopefully it will work tomorrow, with a clear head. Link to comment Share on other sites More sharing options...
dad Posted November 27, 2020 Report Share Posted November 27, 2020 18 minutes ago, loo said: it didnt work but then i have probably done it wrong, hopefully it will work tomorrow, with a clear head. If you’d like to PM me the layout, I’d be happy to take a look. Link to comment Share on other sites More sharing options...
loo Posted November 27, 2020 Author Report Share Posted November 27, 2020 thanks dad, but i have just got it to work, and then i had the NO PC key, which it seems you cant set until you have a cash door button. so i typed 5 in there ( dont know what number it should be , figure that out later) and now i have absolutely nothing displayed on the 7 segment leds, guessing it the sec meter or reels as they havent moved. i will see if i can fix, if not i will pm you, thankyou. Link to comment Share on other sites More sharing options...
Recommended Posts