Geddy Posted May 1, 2020 Author Report Share Posted May 1, 2020 2 minutes ago, dad said: Fuck that! If it's whiskey I'll chuck it down my neck whether its single malt or not Last time I was in Glasgow they had a bottle there for about £800 and I couldn't help thinking how many bottles of Aldi whiskey could I buy with that hahah! I'm partial to St Andrew's though very nice that, even though its a blended whiskey. I think there was some in the Edinburgh Castle shop that was £3500, knowing my luck I'd drop the fucker on the way home... I think £100 is about my limit and the bottle will last ages... I've had some in my cabinet for over five years now... Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Zippy Posted May 1, 2020 Report Share Posted May 1, 2020 (edited) Just phoned AA(no Geddy not breakdown although with the legacy stuff you are doing atm I'd be dead already) and the three of us have to attend once a week Edited May 1, 2020 by Big J 1 Link to comment Share on other sites More sharing options...
Geddy Posted May 2, 2020 Author Report Share Posted May 2, 2020 (edited) 161 layouts done today, that's Barcrest M, N and O. Will be glad to see the back of Barcrest, then BFM, JPM and Bellfruit are the biggies, although to be fair most of Bellfruit are already .fml Edited May 2, 2020 by Geddy 2 2 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Geddy Posted May 3, 2020 Author Report Share Posted May 3, 2020 (edited) P and Q done this morning, onto the big ones, S and R... might get one of them done today... then it's the home run... hopefully in a couple of weeks I might have the whole shebang done.. however I'll get there Edited May 3, 2020 by Geddy 2 2 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Zippy Posted May 3, 2020 Report Share Posted May 3, 2020 Amazing mate!! 1 Link to comment Share on other sites More sharing options...
Geddy Posted May 3, 2020 Author Report Share Posted May 3, 2020 Managed R and S as well, I'll upload S tomorrow... 245 layouts converted today... phew, time for Glen to visit... Glenmorangie 1 1 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Geddy Posted May 4, 2020 Author Report Share Posted May 4, 2020 Barcrest all done, just need re-packing and I'll upload them later or in the morning, 410 layouts done today... boom.. 1 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Reg Posted May 4, 2020 Report Share Posted May 4, 2020 3 minutes ago, Geddy said: Barcrest all done, just need re-packing and I'll upload them later or in the morning, 410 layouts done today... boom.. Excellent - thank you mate. That was the worst one yes ? Link to comment Share on other sites More sharing options...
Geddy Posted May 4, 2020 Author Report Share Posted May 4, 2020 17 minutes ago, Reg said: Excellent - thank you mate. That was the worst one yes ? Yeah fella by a long way, Barcrest had 17 sections, next most I think is BFM and most of them are already .fml. BWB, BFM and JPM out the way it's a doddle... basically a manufacturer a day. The 'misc' section will take some sorting out to make sure the correct roms are about as will Maygay... most Maygay's have 're-named' roms in them which is a shame as it's one company that actually has the rom name and revision in the file! 1 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Stonesfan Posted May 7, 2020 Report Share Posted May 7, 2020 I seem to recall a machine called 'Break and Take' which had a cousin called 'Crack the Egg'. Am I just making this up or is there a version of this machine to download and play? Link to comment Share on other sites More sharing options...
stevedude2 Posted May 7, 2020 Report Share Posted May 7, 2020 I remember Crack the Egg and I think there's a pic somewhere but a layout was never done for it. There was Tuppenny Cracker and Smash and Grab though, which have been done. Might need an older version of MFME though Link to comment Share on other sites More sharing options...
Stonesfan Posted May 8, 2020 Report Share Posted May 8, 2020 Just had a look through the legacy section. Wow. Fantastic work from Geddy. Seriously appreciated here mate. Its amazing how playing a machine that you last played during you teens brings back so many emotions. Chances are your mum and dad didn't know you were playing, the thrill of winning a few quid, or in one case trying to make it out of the chippy without being lynched by the local herberts having cleared the machine out. Truly toasting work. 1 1 Link to comment Share on other sites More sharing options...
Zippy Posted May 8, 2020 Report Share Posted May 8, 2020 23 hours ago, Stonesfan said: 43 minutes ago, Stonesfan said: Just had a look through the legacy section. Wow. Fantastic work from Geddy. Seriously appreciated here mate. Its amazing how playing a machine that you last played during you teens brings back so many emotions. Chances are your mum and dad didn't know you were playing, the thrill of winning a few quid, or in one case trying to make it out of the chippy without being lynched by the local herberts having cleared the machine out. Truly toasting work. Thank you Adam. The Legacy section has nothing to do with me as it is all Geddy's doing but thanked you because of our PM's. Cheers and good luck on your journey fella. Link to comment Share on other sites More sharing options...
Geddy Posted August 28, 2020 Author Report Share Posted August 28, 2020 Well I've been home a week after a month away on Holiday. 72 layouts were released during that time and I'm pleased to say all have been sorted and uploaded to the Gallery and Legacy section, you may now continue to release since I've caught up... thanks 1 3 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Geddy Posted March 28, 2021 Author Report Share Posted March 28, 2021 *cough* erm the legacy section is getting a complete update. Work has started but trying to do it bit by bit so there are no great lengths of time where whole sections are missing... cheers. 7 1 2 Not Retired from FME June 2022 Link to comment Share on other sites More sharing options...
Recommended Posts