HazelSX2 Posted March 7, 2020 Report Share Posted March 7, 2020 (edited) Hey! I have several raspberry pi 3 boards and would like to use it instead of iPac/PacDrive encoder. My question is: Does anyone know if MFME is compatible with it? Is there a way to turn the raspberry pi into an "iPac" like driver board? Edited March 7, 2020 by HazelSX2 Link to comment Share on other sites More sharing options...
gareth_iowc Posted March 15, 2020 Report Share Posted March 15, 2020 Hey The raspberry pi is the wrong device for the job. I'm using a pac drive to run the lamps and an arduino with uno joy software for the button inputs. Link to comment Share on other sites More sharing options...
HazelSX2 Posted March 16, 2020 Author Report Share Posted March 16, 2020 On 15/03/2020 at 17:45, gareth_iowc said: Hey The raspberry pi is the wrong device for the job. I'm using a pac drive to run the lamps and an arduino with uno joy software for the button inputs. Thanks for the info. I bought now several pac drives and a iPac 2 Board (i didn't thought that an arduino does this job well too...) to get started. Link to comment Share on other sites More sharing options...
Majoris Posted October 16, 2020 Report Share Posted October 16, 2020 (edited) Arduino does the job fine (lamps, hopper payout), but you would have to use additional software (Fruit Squeezer - my soft, not updated from a while, but I'm thinking on updating it to the latest MFME). It worked up to v.19 as far as I remember. Edited October 16, 2020 by Majoris Link to comment Share on other sites More sharing options...
Recommended Posts