clarkster Posted October 4 Report Share Posted October 4 I have poundstretcher(ace) 10p play £4jackpot layout by Pook on my cabinet but it’s wanting to pay out in 10ps only. So for wins over a pound, say £1.10 it pays 11 x 10p. I know the actual machine used to pay £1 coins. Is this because the emulator thinks it’s low on £1 coins? is there any way to solve this issue as my hopper setup is £1 and 10p hopper configuration Also, is there any way to change the percentage of each different layout or is this already chosen when a layout is created? Thanks in advance 1 Link to comment Share on other sites More sharing options...
davep180 Posted October 4 Report Share Posted October 4 It’s probably down to the roms. For cabinet use I’m always looking for £1 coin payouts rather than 10x10p too. Some %ages can be changed in the gam file, but some are unchangeable. Link to comment Share on other sites More sharing options...
clarkster Posted October 4 Author Report Share Posted October 4 Yeah it gets a bit much having a tray full of 10ps when you collect a few quid, especially on games where tokens are set to 10ps as well . Ok thanks I will have a play around with a few and see if I can alter the percentage payout. Do you mean in the drop down menus when the gam file is loaded? Link to comment Share on other sites More sharing options...
fruitsnappa Posted October 4 Report Share Posted October 4 Add check boxes 12,13,14,15 and tick them. It's one of them for £'s 3 ᗧ···ᗣ···ᗣ···ᗣ···ᗣ·· Link to comment Share on other sites More sharing options...
Road Hog Mad Posted October 4 Report Share Posted October 4 38 minutes ago, clarkster said: Yeah it gets a bit much having a tray full of 10ps when you collect a few quid, especially on games where tokens are set to 10ps as well . Ok thanks I will have a play around with a few and see if I can alter the percentage payout. Do you mean in the drop down menus when the gam file is loaded? I have a £1 and 20p hopper, but changed the roms on my £6 tokens one to cash, so 6x£1 in stead of 30x 20p. ROMS are here, generally the ones with a C on are cash. 2-step-bellfruit-rom directory listing Link to comment Share on other sites More sharing options...
davep180 Posted October 4 Report Share Posted October 4 2 hours ago, clarkster said: Yeah it gets a bit much having a tray full of 10ps when you collect a few quid, especially on games where tokens are set to 10ps as well . Ok thanks I will have a play around with a few and see if I can alter the percentage payout. Do you mean in the drop down menus when the gam file is loaded? Yeah, or you can edit the .gam file in notepad. Link to comment Share on other sites More sharing options...
Road Hog Mad Posted October 4 Report Share Posted October 4 1 hour ago, davep180 said: Yeah, or you can edit the .gam file in notepad. Tell me more! Link to comment Share on other sites More sharing options...
davep180 Posted October 5 Report Share Posted October 5 (edited) 11 hours ago, Road Hog Mad said: Tell me more! For newer machines you can quite often change percentage by loading the .gam file into notepad. Just right click on the gam file and open with notepad. You will get something like this….. System IMPACT DIP 1 00000000 Delay 25000 Stake 4 Jackpot 4 Percentage 10 SetPercent 90 TotalIn 11790 TotalOut 10402 Played 36 Layout Snakes.dat Sound SLaddersS.BIN ROM SLadders1.hex ROM SLadders2.hex You change the number on percentage AND setpercent. For instance 80% is percentage 5 and setpercent is 80. 82% would be 6 and 82. 7 and 84 etc. Not sure how low it’ll go. Probably 1 and 72? Edited October 5 by davep180 Messed up maths for 1 and 72 1 1 Link to comment Share on other sites More sharing options...
Road Hog Mad Posted October 5 Report Share Posted October 5 6 minutes ago, davep180 said: For newer machines you can quite often change percentage by loading the .gam file into notepad. Just right click on the gam file and open with notepad. You will get something like this….. System IMPACT DIP 1 00000000 Delay 25000 Stake 4 Jackpot 4 Percentage 10 SetPercent 90 TotalIn 11790 TotalOut 10402 Played 36 Layout Snakes.dat Sound SLaddersS.BIN ROM SLadders1.hex ROM SLadders2.hex You change the number on percentage AND setpercent. For instance 80% is percentage 5 and setpercent is 80. 82% would be 6 and 82. 7 and 84 etc. Not sure how low it’ll go. Probably 1 and 76? Learn something new everyday Link to comment Share on other sites More sharing options...
clarkster Posted October 6 Author Report Share Posted October 6 Thanks for the info and help guys I managed to get the £1 payout working with adding the checkboxes. I’m gonna have a play around with some of the percentages on a few layouts now I know what to do Will post some pics up of the finished build when I get chance 3 Link to comment Share on other sites More sharing options...
davep180 Posted October 7 Report Share Posted October 7 Do you know which number checkbox is the £1? Thanks Link to comment Share on other sites More sharing options...
clarkster Posted October 7 Author Report Share Posted October 7 4 hours ago, davep180 said: Do you know which number checkbox is the £1? Thanks No idea I just added all 4 (12,13,14,15)then played for winning over £1 and it worked. I could probably check by process of elimination tomorrow when I’m back at home Link to comment Share on other sites More sharing options...
davep180 Posted October 7 Report Share Posted October 7 9 minutes ago, clarkster said: No idea I just added all 4 (12,13,14,15)then played for winning over £1 and it worked. I could probably check by process of elimination tomorrow when I’m back at home No problem mate. I’ll do the same as you. Link to comment Share on other sites More sharing options...
Recommended Posts