Boulderdash Posted May 31, 2024 Report Share Posted May 31, 2024 Hi all Please can one of you lovely people remind me how to get Barcrest Celebration Club into test mode so I can have a play with the bar winner feature? @Pook Link to comment Share on other sites More sharing options...
dad Posted May 31, 2024 Report Share Posted May 31, 2024 52 minutes ago, Boulderdash said: Hi all Please can one of you lovely people remind me how to get Barcrest Celebration Club into test mode so I can have a play with the bar winner feature? @Pook Delete the 38 & 39 from the door switches in config then reset the machine Ctrl + R. You can then enter test mode in the usual way by checking door 'S' and using the test button (press once for freeplay, twice for test mode). Link to comment Share on other sites More sharing options...
Boulderdash Posted May 31, 2024 Author Report Share Posted May 31, 2024 Sorry, I'm failing at the first hurdle. I don't see where I delete door switches. Link to comment Share on other sites More sharing options...
dad Posted May 31, 2024 Report Share Posted May 31, 2024 17 minutes ago, Boulderdash said: Sorry, I'm failing at the first hurdle. I don't see where I delete door switches. Enter Design/Edit mode, then click Configuration. In the pop up window (top right) you should see the Service & Cash door switch numbers 39 & 38. Delete/Clear those then reset the machine by pressing Ctrl + R on your keyboard. You can then enter test mode in the usual way by checking door 'S' and using the test button (press once for freeplay, twice for test mode). Hope this helps Link to comment Share on other sites More sharing options...
Boulderdash Posted May 31, 2024 Author Report Share Posted May 31, 2024 1 hour ago, dad said: Enter Design/Edit mode, then click Configuration. In the pop up window (top right) you should see the Service & Cash door switch numbers 39 & 38. Delete/Clear those then reset the machine by pressing Ctrl + R on your keyboard. You can then enter test mode in the usual way by checking door 'S' and using the test button (press once for freeplay, twice for test mode). Hope this helps Thanks again, but unless I'm being spectacularly dim there is nothing in those boxes. If I just open S door and press 'test' once it puts in 20 credits. Press it again it does a reel spin test. I press start and it tests the alphas and press test again it flashes all lamps. I'm trying to get it into the state where it always wins on the trail so I can play with the climb. Someone showed me before but I can't find the instructions for that. Link to comment Share on other sites More sharing options...
Boulderdash Posted December 13, 2025 Author Report Share Posted December 13, 2025 Any further help on this please? I really want to be able to climb through the block at hi-lo notes, but can't find the way to ensure I always win the climb gamble Link to comment Share on other sites More sharing options...
thealteredemu Posted December 13, 2025 Report Share Posted December 13, 2025 Demo mode applies the credits, you should be able to play the machine and manipulate the holds etc, try cancel and any hold button, you should find you can move reel positions. It might be that when you have a gamble you can press cancel to progress the gamble. It might not even be possible to do this in test mode on this machine I’m not too sure. I know my Maygay Donkey had a load of ways to manipulate the hi lo gamble and board positions whilst in test mode. Do you have a link to the layout, I could give it a go and check J Link to comment Share on other sites More sharing options...
Recommended Posts