SuperStyles Posted May 22, 2022 Report Share Posted May 22, 2022 Hello! I was just wondering, is there a way I can change how fast or slow the fruit machine goes? In addition, i'd love to know if there's a way to adjust the volume then no volume option is available on the machine itself. Thanks. Link to comment Share on other sites More sharing options...
wearecity Posted May 23, 2022 Report Share Posted May 23, 2022 Firstly with Wizard the author no longer with us, any alterations to the emulator, would have to be 3rd party additions, that work with the emulator. SPEED In the emulator itself speed cannot be changed as machines run as per their original speed. Wizard, in the past, indicated, that changing it, would break the emulation, on some technologies. In the Arcade Simulator, start up speed for machines, have been quickened up, so I guess, it might be possibly again with 3rd party additions. SOUNDS Pressing shift + , will turn the emulator volume up and shift - down. In the installation folder of MFME, is a tips.txt file, with lots of shortcut information. Sounds on individual machines, can be turned up and down, but it depend on the technology they run on, as to how you do it. Also, within the technologies, there may be differences. Generally, you need to do it by entering test/open door modes. Make sure the meter panel is showing, if not push F9, you'll see the doors and test/refill checkboxes as well. On Scorpion 4 machines, tick the S door, after it initialises, you'll see read meters, press the test button, to enter test modes. Using the flashing button, go through the tests, until you see volume, then press start and use the buttons to up the volume. Afterwards, untick the S door to get back to normal. On MPU5 Barcrest machines, try holding down the middle hold button and ticking the refill box. It should then show the volume control. 1 Link to comment Share on other sites More sharing options...
Recommended Posts