davep180 Posted August 30, 2021 Report Share Posted August 30, 2021 Hi. it's me again. I cannot for the life of me set this up without it dumping the contents of my hopper. I've tried loads of triac numbers, to no avail. I switched the meter 6*1 to 6*2, as advised in the mecca, run a lamp table and it flashes 64 and 81 when paying out 10p's, but unlike the Sys80's I can't find a way to use this information to set the triacs. As usual, any help will be gratefully received! Link to comment Share on other sites More sharing options...
Amusements Posted August 30, 2021 Report Share Posted August 30, 2021 (edited) Tokens = Tiac - > Hopper 2 *1 10p = Tiac - > Hopper 1 *1 Sometimes you have to unplug the Pacdive and reboot MFME to clear a payout problem, if you mess up with the wrong triac settings. Edited August 30, 2021 by Amusements My R button is playing up now Treat every day like your last, because one day it will be! Fruit Machine <<<My new project! Link to comment Share on other sites More sharing options...
davep180 Posted August 31, 2021 Author Report Share Posted August 31, 2021 Thanks @AmusementsLooks like I may have to leave this one then, Hopper 1 is for £1 coins in my setup. I think thats why it dumps the 10p coins, as its been looking for a different stop signal. Link to comment Share on other sites More sharing options...
davep180 Posted August 31, 2021 Author Report Share Posted August 31, 2021 Just realised that I am an utter idiot. I set the hoppers to the wrong ipac numbers, so it wasn't receiving the signal to stop the hopper. Thanks Amusements for pointing me in the right direction. Link to comment Share on other sites More sharing options...
Recommended Posts