Jump to content

Resetting a machine?


CasinoFruits
 Share

Recommended Posts

Just now, CasinoFruits said:

Hi.  Played a few layouts now and really enjoyed them.  Is there a way to reset a machine to factory settings, so that you know exactly how much has gone into it?  Thanks.

Think you have said that a little wrong, if you factory reset it all stats return to zero, or you can execute long term or current stats,

To factory reset (clear ram to 0)> Config then clear ram down the bottom,

For long term stats> File-Preferences-check long term meters (7th box).

Hope that helps.

 

  • Like 1

 

 

Link to comment
Share on other sites

1 hour ago, CasinoFruits said:

Hi.  Played a few layouts now and really enjoyed them.  Is there a way to reset a machine to factory settings, so that you know exactly how much has gone into it?  Thanks.

Be aware if you Ram Clear newer machines, especially Scorp 4 & 5 machines you will have to set the Note Acceptor / Hoppers and Maybe Coin input up again which can be tricky if you don't know what you are doing.

  • Like 1
Link to comment
Share on other sites

20 hours ago, Zippy said:

Think you have said that a little wrong, if you factory reset it all stats return to zero, or you can execute long term or current stats,

To factory reset (clear ram to 0)> Config then clear ram down the bottom,

For long term stats> File-Preferences-check long term meters (7th box).

Hope that helps.

 

Hi @Zippy   Thanks for your reply.  That's exactly what i meant, and helps a lot.  I'm new to this emulation, but I'm glad you understood what I meant to say!   Thanks again!

 

  • Like 1
Link to comment
Share on other sites

18 hours ago, Mavroz said:

Be aware if you Ram Clear newer machines, especially Scorp 4 & 5 machines you will have to set the Note Acceptor / Hoppers and Maybe Coin input up again which can be tricky if you don't know what you are doing.

Hi @Mavroz   Thanks for your reply.   Doesn't sound like a good idea for me to do that then!  Wouldn't have a clue how to set things like that up!   Thanks again!

 

  • Like 1
Link to comment
Share on other sites

F9 shows the meter bar on/off

With the bar showing

F12 Toggles between current session in and out meters and the long term in and out meters.

F11 Toggles between profit/loss and drift and shows the profit/loss and drift stats, for both the current and long term meters.

Inside your MFME installation folder is a tips.txt document. It contains shortcut information.

Edited by wearecity
  • Like 2
Link to comment
Share on other sites

 Share

×
×
  • Create New...