Road Hog Mad Posted July 25, 2021 Report Share Posted July 25, 2021 Ever since I have had my cab if I power up everything at the same time the hoppers empty completely, if I power up the hoppers after mfme is loaded they're fine. I have worked around this by doing the above. I have followed the wiring diagram which got them to work initially, I think it was no1stoney's but don't quote me on that. I use x2 universal hoppers 12v. Any ideas? Link to comment Share on other sites More sharing options...
davep180 Posted July 25, 2021 Report Share Posted July 25, 2021 Just a thought, but is your pacdive the "special" one that powers up with everything in the off position? When oredered, I had to specify id number and the special bit. Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 25, 2021 Author Report Share Posted July 25, 2021 Yes I requested that one. Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 25, 2021 Author Report Share Posted July 25, 2021 Although I have never checked it lol Link to comment Share on other sites More sharing options...
Amusements Posted July 25, 2021 Report Share Posted July 25, 2021 (edited) Do you have any diagrams of the hopper, and how you have connected everything to the Pacdrive and Ipac? Edited July 25, 2021 by Amusements Treat every day like your last, because one day it will be! Fruit Machine <<<My new project! Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 25, 2021 Author Report Share Posted July 25, 2021 Erm... I just followed the one on here, not sure where it is though Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 25, 2021 Author Report Share Posted July 25, 2021 Found it Link to comment Share on other sites More sharing options...
Amusements Posted July 25, 2021 Report Share Posted July 25, 2021 That diagram looks right. Pin 1,2,3 = +V (+12V o. +24V DC) Pin 4,5,6 = -V (GND) Pin 7 = motor start Pin 8 = (not used) Pin 9 = coin signal Pin 10 = (not used) Ask Stoney if he has the same trouble as you. Treat every day like your last, because one day it will be! Fruit Machine <<<My new project! Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 25, 2021 Author Report Share Posted July 25, 2021 That's if it was @No1Stoney, I honestly can't remember. Link to comment Share on other sites More sharing options...
No1Stoney Posted July 25, 2021 Report Share Posted July 25, 2021 5 hours ago, Road Hog Mad said: That's if it was @No1Stoney, I honestly can't remember. Yes that my (somewhat messy) diagram 8 hours ago, Road Hog Mad said: Ever since I have had my cab if I power up everything at the same time the hoppers empty completely, if I power up the hoppers after mfme is loaded they're fine. I have worked around this by doing the above. I have followed the wiring diagram which got them to work initially, I think it was no1stoney's but don't quote me on that. I use x2 universal hoppers 12v. Any ideas? Do you have the pacrdrive that is OFF on startup (the special version) ? Sounds like it could be to do with that Link to comment Share on other sites More sharing options...
Road Hog Mad Posted July 26, 2021 Author Report Share Posted July 26, 2021 11 hours ago, No1Stoney said: Yes that my (somewhat messy) diagram Do you have the pacrdrive that is OFF on startup (the special version) ? Sounds like it could be to do with that No idea, how do I check? I do recall asking for one of those. Link to comment Share on other sites More sharing options...
No1Stoney Posted July 26, 2021 Report Share Posted July 26, 2021 Just attach a bulb to it and if the bulb comes on when you turn on the PC, its the wrong one. 1 Link to comment Share on other sites More sharing options...
Recommended Posts