Marilesis

You are right, thank you, there must be ground for the coin signal, I guess I will use an optocouplsr, just to be safe

I connected the Azkoyen hopper to 24 Volts that do not come from the PC. Start Hopper goes to pacdrive - working. Coin detect goes to ipac - not working. Ipac ground is PC ground, so what can I do?

Thanx I know that... It's a bit weird, in Launch box for Cancel there is ?? Any idea? I don't wNt to change it in every single game...

Oh wow thanx a lot Did not see your reply earlier I will try Take care Manfred

Hey, My fruit slot machine goes well together with ipac and pacdrive however... My cancel button does not work. Normally it is the accent grave as far as I can see but... Where is it? How does the Ipac software calls this? Or is there a problem because I only have a German keyboard?

Hi there, I managed to tell my Azkoyen hopper to start the motor with a relay bet ween pacdrive and the 24V hopper. Now, I have to connect the coin output of the hopper to my ipac2 for counting the coins. Can anyone say how to do this? I guess, there are 24 Volts on the coin output which is not too good for the ipac... Any help appreciated

Hallo Peter, Sehr sehr schön, meine Hochachtung! Wie hast Du die Geldverarbeitung umgesetzt, mit parallelen Prüfer und hopper aus Punktespieler? Ich versuche mich gerade mit cctalk und Schnittstellen von roottech, aber fürchte, das wird nicht funktionieren. Ich bin für jede Hilfe dankbar! Liebe Grüße aus Bad Wünnenberg Manfred

Ofcourse the brexit brings lots of problems, sometimes I also had to order from the UK and it nearly doubles the costs. I am here in Germany and at the moment there are very few hoppers, some cheap ones in Slovenia or Slovakia, but I have some doubts about it ... I think I will give these interfaces a try and - yes - I will let the community know, you know, one hand washes etc ! I hope to give some infos back as I still have loads of questions ...

Thanx Davep180, I already read about it, what do you think of this (sorry Italian site): https://www.roottech.it/store/product/rth-cc-convertitore-hopper-cctalk-a-hopper-parallelo-1 and https://www.roottech.it/store/product/convertitore-da-gettoniera-cctalk-a-impulsi-rtg-cc-roottech

Hello guys, I am building a fruit machine on basis of a Bally Wulff Game Station (German slot) and would like to kniow, if anybody here has experiences with this: https://www.roottech.it/store/product/convertitore-da-gettoniera-cctalk-a-impulsi-rtg-cc-roottech and this: https://www.roottech.it/store/product/rth-cc-convertitore-hopper-cctalk-a-hopper-parallelo-1 If I understand this correctly, the interfaces can change a cctalk unit to a parallel or impulse unit. Does this mean, I can use these for MFME ? Cheers, Manfred

Hi folks, I do the same project at the moment. Got a Bally Wulff Game Station with the 26" monitor and Azkoyen coin acceptor and hoppers, ccTalk. Did you manage to get the fruit machine working with these or what did you do? Any help would be great! Manfred