EdwardFarmer

Hey pal, yes mate, i went woth the 12v as found it better with the hoppers i used as when i used a 24v supply to them they ran to fast throwing out a few extra coins Regarding the bulbs i just used 5v as i power them from my pac drive 5v supply they seem bright enough for me, you just need to make sure you have the right bulbs I can sort you a GND diagram to how i did mine will tey sort that for you was pretty straight forward when i got going i just daisy chain. Regarding the heat from the TV atm my cabinet is open top and back so bot needed a fan yet can show you a pic of that also later when home. Also hear to help pal dont worry about asking i was the same got to learn somewhere as you want to get it bang on.

I have a 12v separate powerr supply in mine to feed the hoppers and coin mech, i found that a much better way than coming of the PC itself

Hey mate, i built one like a full cabimet using a 43" screen, there is someome on here who has converted a old machine but the screen is not that big so does not fit edge to edge if i was you i would build you own cabinet

I made this and now iam sellimg of my Astra cab i think this is like an all in one machine

Off the top of my head i used a 43" screen then brought a touch screen surrond to make it touch screen Will get some inside pics for you

Yh mate, still a work in progress but pretty much runnin a pay in and out system using 3 hopper

Thanks mate

Not far off completion now main thigs to do are to go through all the games adding coin input and hoppers

Hey mate, yh i thought this but surley there is a way to change it ?

Hey i know on MFME the hopper send this [ as a key press for £1 and this ] for 10p is there a way i can change this on some machines and keep the same on others?

Hey pal, i just brought any TV then put a Infrared touch surround in works great

Looking for 2 hoppers for my build needs to work with i pac and pac drive

Will this be easy to wire and run with mfme ?

Thanks mate, so i can just wore the 0v to an earth?

Hey, if i was to go of this picture, what are the 2 black squares bottom left ? And also does nothing go into the 5v bottom left either ? Thank you

This still available or where could i get one from?

Thank you for getting back to me, what I pac are you using ? Thank you will take a look at that thread

Hey, when wirring a coin mech to a MFME cabinet build, how do you get it to register each coin, as in if i put a 5p in does it send a signal to the fruit machine game in play that it was a 5p? And so on for other coins Also has each coin got its own key binding ?

Does this coin mech allow all coins ? As in if i put a 5p in it wpuld register it as 5p on the machine ?

Hey, I have loved fruit machines since I was little, I have owned a few but would love to make my own virtual one loads of games in one cabinet, how are other peoples builds coming along and how are you getting the games to play ?